Installing The Hot-Swap Fan; Figure 39. Removing Hot-Swap Fan; Figure 40. Installing Hot-Swap Fan - Intel P4000IP Series Service Manual
Server/workstation system
Hide thumbs
Also See for P4000IP Series:
- Technical product specification (112 pages) ,
- Installation instructions manual (11 pages)
Table of Contents
Advertisement
Installing the Hot-swap Fan
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
3.
4.
Insert hot-swap fan into corresponding chassis slot until it clicks into place.
®
Intel
Server System P4000IP and Intel
Figure 39. Removing Hot-swap Fan
Figure 40. Installing Hot-swap Fan
®
Workstation System P4000CR Service Guide
Hardware Installations and Upgrades
35
Advertisement
Table of Contents
