Figure 129. Mass Storage Controller Configuration Screen - Intel P4000IP Series Service Manual

also informational displays of AHCI and SCU controller configuration, and SATA Drive
Information when applicable. If the presence of an Intel
Storage Module is displayed as information-only.
To access this screen from the Main screen, select Advanced > Mass Storage Controller
Configuration. To move to another screen, press the <Esc> key to return to the Advanced screen,
then select the desired screen.
Advanced
Mass Storage Controller Configuration
AHCI Controller Configuration
SATA/SAS Controller Configuration
AHCI Capable SATA Controller
AHCI eSATA Options
AHCI HDD Staggered Spin-Up
AHCI Capable RAID Options
SAS/SATA Capable Controller
RSTe Boot Configuration
Intel® Storage Module
- None / <Name of storage module detected >
SATA Port 0
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4
SATA Port 5

Figure 129. Mass Storage Controller Configuration Screen

Screen Field Descriptions:
1. AHCI Controller Configuration
®
Intel Server System P4000IP and Intel
<AHCI Port Configuration>
<SCU SAS/SATA Port Configuration>
Disabled/Compatibility/Enhanced/AHCI/RAID Mode
SATA / eSATA
Enabled/Disabled
INTEL(R) ESRT2 (LSI*) / INTEL(R) RSTe
Disabled / INTEL(R) ESRT2 (LSI*) / INTEL(R) RSTe
Neither / AHCI Capable Ctrlr / SAS/SATA Capable Ctrlr
Not Installed /
Not Installed /
Not Installed /
Not Installed /
Not Installed /
Not Installed /
®
Workstation System P4000CR Service Guide
BIOS Setup Utilities
®
Storage Module is detected, the type of
<Drive Information>
<Drive Information>
<Drive Information>
<Drive Information>
<Drive Information>
<Drive Information>
121