Dvi Lcd Panel Connector(Cn7); Tv-Out Interface (Cn12); Ethernet Configuration (Cn2, Cn23); 100Base-T Connector (Cn23) - Advantech M600 User Manual

plays. Users can connector to either an 18, 24, 36bit LVDS LCD with
CN16

2.17.3 DVI LCD panel connector(CN7)

Digital Visual Interface (DVI) is the standard interface for high-perfor-
mance connection between PCs and Flat Panel Displays, Digital CRT dis-
plays, Projectors, and HDTV. The PCM-9586 is able to drive a DVI
connector display at a pixel resolution up to 1600 x 1200 at 85Hz.
Panel type and Resolution mode selection
Customer can select display type and boot number from BIOS menu
selection.

2.18 TV-out interface (CN12)

The PCM-9586 board provides TV-out function via CN12. This consists
of a 5-pin wafer box header. Output supports composite video, S-video
and SCART(RBG). TV-out generators use both NTSC and PAL for-
mats.It supports up to 1024 by 768 with full vertical and horizontal under-
scan capability.
To set up your video interface run the appropriate installation program
located on the utility disk.

2.19 Ethernet configuration (CN2, CN23)

The PCM-9586 is equipped with a high performance 32-bit PCI-bus
Ethernet interface which is fully compliant with IEEE 802.3U 10/
100Mbps CSMA/CD standards. It is supported by all major network
operating systems.
The medium type can be configured via the RSET82540.EXE or
RSET82559.EXE program included on the utility disk. (See Chapter 3 for
detailed information.)

2.19.1 100Base-T connector (CN23)

10/100Base-T connects to the PCM-9586 via an adapter cable to a 10-pin
polarized header (CN23).
21 Chapter 2