Table of Contents
Advertisement
SEAT
SEAT DEPTH
2
Check that all screws are fixed securely.
All adjustments must be made by authorized specialist dealers.
We shall decline all liability for damage and injuries caused by adjustments performed by
unauthorized persons.
7
6
4
3
5
The seat frame can be set at different heights. To lock
the distance between the back frame and the seat,
fold the flap of the backrest under the seat (Velcro
fastening).
To change the seat cover, remove the screw at the
front end of the seat frame. Then pull the locking pin
out. Now the seat can be removed by pulling it gently
forwards. Do the reverse when you want to replace
the seat.
Check that all screws are fixed securely.
1
Instruction Manual Eclips X4
Last updated: May 2003
To adjust the seat depth,
loosen the screws (5) and/or
loosen the screws (4), pull out
the front of the frame (2), and
pull out the back frame (1).
The front and rear sockets on
the basic frame (3) for the
hinged tubes (seat) must also
be loosened (7). If you have
chosen
adjustable
adapter (6) for your model,
you will alsoneed to loosen it
when adjusting your seat
depth.
After
setting
required seat depth, retighten
the relevant screws. At the
bottom of the back there is a
flap that can be attached
below the seat with a Velcro
fastener, thereby closing the
gap between the seat and the
back. It is not necessary to
adjust the seat.
axle
the
7
Advertisement
Table of Contents
