Table of Contents
Advertisement
PREFACE
First of all we wish to thank you for the trust you placed in us by selecting one of our wheelchairs.
The electric wheelchairs supplied by Vermeiren are the result of research and experience over many
years. During the development simplicity of operation and servicing have been emphasized in
particular.
But the expected working life of your vehicle depends essentially on your care and maintenance. This
instruction manual will help you to get acquainted with the operation of your wheelchair and advise
you about keeping your electric wheelchair in a good operational condition to ensure a long working
life.
This instruction manual reflects the latest stage of development of the product. However, our firm,
Vermeiren, reserves the right to introduce changes without any obligation to adapt or replace
previously delivered models.
Kindly keep in mind that your wheelchair will be in an excellent working condition and function
perfectly even after many years, if you follow our advice.
If you have any further questions, kindly consult your specialist dealer.
TECHNICAL DETAILS
(given in terms of the standard adjustments when delivered)
The total length/height might be quite different when other leg and head supports are used or extra
parts are fitted.
Length (without leg supports) in cm
Length (with leg supports) in cm
Height (backrest included) in cm
Seat width in cm
Total width in cm
Seat depth in cm
Seat height in cm
Back height in cm
Height of armrests (with seat
cushion) in cm
Weight (armrests/leg supports
included)
Nominal max. load
Tyres
Operating pressure, steering wheels
Operating pressure, driving wheels
If wheels other than the standard wheels supplied by us are fitted you must in any case check the
max. operating pressure as given on the tyre walls.
Cruising properties
Max. climbing ability
Max. obstacle height
39
42
44
59
62
64
From 12.8kg
130 kg
2.5 bar
3.8 bar
10.5% / 6°
6 cm
Instruction Manual Eclips X4
Last updated: May 2003
84 - 105
100 - 121
86 - 104
46
48
50
66
68
70
42 - 50
39 - 52
42 - 46
22
Measurement tolerance +/- 15 mm
55
74
4
Advertisement
Table of Contents
