Table of Contents
Advertisement
TOOLS
The following tools are required for assembling and adjusting your lightweight wheelchair:
Phillips screwdriver
Allen keys (sizes 4 and 5)
Ring and open-ended spanners (sizes 10/13)
Ring spanner (size 19)
Open-ended spanner (size 11)
Assembly and adjustments may only be undertaken by your specialist dealer.
GUARANTEE
Excerpt from the "General business conditions":
(...)
For processing defects or material faults discovered after delivery, we accept liability, computed from the
calculation date, for the warranty period of the relevant product group.
(...)
-
Lightweight wheelchair
(...)
The following are excluded from the guarantee:
-
Damage caused by structural alterations of our products
-
Worn parts
-
Damages caused by the product or its user
-
Damage caused by external influences
-
Damage caused by the usage of non-genuine parts
(...)
We reserve the right either to repair a damaged part or to replace it with a new one. The warranty period is not
extended in such a case. The guarantee is accepted by the specialist trade.
(...)
STATEMENT OF CONFORMITY
The manufacturer or his authorized representative:
N.V. VERMEIREN & Co.
Address:
Vermeirenplein 1/15, B-2920 Kalmthout (Belgium)
hereby declares that
all Model Eclips (0815) wheelchairs
are made in full conformity with the following European guidelines -- including the latest changes -- and
with the national laws encompassing these guidelines:
MDD 93/42/EWG (Medical products)
and that the following harmonized European standards have been implemented:
EN 1041, EN 1441, EN 12182, EN 12183
Date: 01. September 2000
Signature:
M. Van Herck
Instruction Manual Eclips X4
Last updated: May 2003
Four years
Place: Kalmthout (Belgium)
21
Advertisement
Table of Contents
