Input Setup - Integra DTR-5.3 Instruction Manual

Input Setup

This menu allows you to make the various settings concerning the
signals input from the various input sources that you use with the
DTR-6.3/5.3. The settings made in this menu are valid for the input
source that is currently selected with the input source buttons at the
front panel and, therefore, these settings are made separately for each
input source.
Setup Procedure
1. Select the desired input source.
2. Press the Menu button on the front panel or Setup
button on the remote controller.
The main menu appears.
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
|ENTER|Quit:|SETUP|
52
Menu
/
Input source buttons
Return
Return
Input Selector
buttons
/ /
3. Use the
Setup" and then press the ENTER button.
The "Input Setup" menu appears. Press the
move to the next screen.
* Menu *****************
1.Speaker Config
4.Input Setup
2.Speaker Distance
*** Input:DVD
3.Level Calibration
4.Input Setup
a.Digital Input :COAX
5.OSD Setup
b.Digital Format:All
6.Preference
c.Multichannel
d.Component Video
e.IntelliVolume
* Menu *****************
1.Speaker Config
4.Input Setup
2.Speaker Distance
*** Input:DVD
3.Level Calibration
4.Input Setup
f.Analog/PCM Source
5.OSD Setup
6.Preference
g.PCM fs96kHz Source
h.Digital Format
* Menu *****************
1.Speaker Config
4.Input Setup
2.Speaker Distance
*** Input:DVD
3.Level Calibration
4.Input Setup
5.OSD Setup
i.12V Trigger A :on
6.Preference
j.12V Trigger B :off
4. Use the
then use the
value.
Press the Return button to return to the main menu.
Press the Menu button on the front panel or Setup button on the
remote controller to exit the Setup menu.
Setup
/
ENTER
and cursor buttons to select "4. Input
*******
:Yes
:Input1
: 0dB
Quit:|SETUP|
*******
:Stereo
:Stereo
Source :Surround
Quit:|SETUP|
*******
Quit:|SETUP|
and cursor buttons to select an item and
and cursor buttons to set the desired
/ /
cursor button to