Presetting A Radio Station; Selecting A Preset Radio Station; Erasing A Preset Radio Station - Integra DTR-5.3 Instruction Manual

Listening to Radio Broadcasts

Presetting a radio station

1. Tune into the radio station you desire (see "Tuning
into a radio station").
2. Press the Memory button on the front
panel.
The MEMORY indicator lights red.
3. Using the Preset / buttons, select a
preset number (from 1 to 40) to
assign the station.
4. Press the Enter button to finalize the
procedure.
The memory indicator turns off and the
assigned number lights.
This programs the radio station as a preset radio station.
• Up to 40 stations can be stored in memory as preset radio
stations.
42
FM Mode
Memory
Tuner
"MEMORY"
Flashes
(Lights red)
TUNED
MEMORY AUTO
ch
Lights
TUNED
AUTO
ch
Preset /
Enter

Selecting a preset radio station

1. Press the Tuner input source button.
2. Press the Preset
select the number of the desired
preset station.
When using the remote controller:
1. Press the RCVR Mode button.
The RCVR Mode button lights green.
2. Press the TUN button.
3. Press the CH
the number of the desired preset
station.

Erasing a preset radio station

This can only be performed at the DTR-6.3/5.3.
1. Press the Tuner button and press the
Preset
preset radio station that you want to
erase (see above).
2. Press and hold the Memory button
and then press the FM Mode button.
The selected preset station is erased.
RCVR
Mode
CH
TUN
/ buttons and
button and select
/ buttons to select the
ch