Integra DTR-5.9 Instruction Manual
  1. Manuals
  2. Brands
  3. Integra Manuals
  4. Receiver
  5. DTR-5.9
  6. Instruction manual

Integra DTR-5.9 Instruction Manual

Integra av receiver instruction manual
Hide thumbs Also See for DTR-5.9:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
AV Receiver
DTR-5.9
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DTR-5.9 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Integra DTR-5.9

Summary of Contents for Integra DTR-5.9

  • Page 1 AV Receiver DTR-5.9 Instruction Manual...

  • Page 2: Important Safety Instructions

    Thank you for purchasing an Integra AV Receiver. Please read this manual thoroughly before mak- ing connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
  • Page 3 Precautions 1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal with- out the permission of the copyright holder. 2. AC Fuse—The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact the dealer.

  • Page 4: Table Of Contents

    Connecting a CD Player or Turntable ... 34 Connecting a Cassette, CDR, MiniDisc, or DAT Recorder ... 35 Connecting an RI Dock ... 36 Connecting Integra/Onkyo Components ... 37 Turning On the AV Receiver ...38 Connecting the Power Cord ... 38 Turning On and Standby ...
  • Page 5 Contents—Continued Playing Your AV Components ... 48 Basic AV Receiver Operation ...48 Common Functions ... 49 Setting the Display Brightness ...49 Muting the AV Receiver ...49 Using the Sleep Timer ...49 Using Headphones ...50 Displaying Source Information ...50 Specifying the Digital Signal Format ...51 Listening to the Radio ...

  • Page 6: Features

    • Powerful and Highly Accurate 32-bit DSP Processing Connections • 4 HDMI Inputs and 1 Output • Integra RIHD for System Control • HDTV-Ready Component Video Switching (2 Inputs/1 Output) • 4 Digital Inputs (2 Optical/2 Coaxial/4 Assignable), 1 Digital Output (Optical) •...

  • Page 7: Multiroom Capability

    Multiroom Capability You can use two speaker systems with this AV receiver—a surround-sound speaker system (up to 7.1 channels) in your main listening room, a stereo speaker system in a second room, or Zone 2, as we call it. And, you can select a dif- ferent audio source for each room.

  • Page 8: Getting To Know The Av Receiver

    Getting to Know the AV Receiver Front Panel North American model 1 2 3 Other models The actual front panel has various logos printed on it. They are not shown here for clarity. The page numbers in parentheses show where you can find the main explanation for each item. On/Standby button (38) Sets the AV receiver to On or Standby.

  • Page 9: Display

    Getting to Know the AV Receiver—Continued Memory button (55) Used when storing or deleting radio presets. Tuning Mode button (53) Selects the Auto or Manual tuning mode for AM and FM radio. Display button (50) Displays various information about the currently selected input source.

  • Page 10: Rear Panel

    Getting to Know the AV Receiver—Continued Rear Panel North American model Q R S T U V W Other models Q R S T U V W DIGITAL IN COAXIAL 1 and 2 These coaxial digital audio inputs are for connect- ing components with a coaxial digital audio output, such as a CD player or DVD player.
  • Page 11 This (Remote Interactive) jack can be connected to the jack on another -capable Integra/ Onkyo component for remote and system control. To use , you must make an analog audio connec- tion (RCA) between the AV receiver and the other component, even if they are connected digitally.

  • Page 12: Remote Controller

    Remote Controller Controlling the AV Receiver To control the AV receiver, press the [Receiver] Remote Mode button to select Receiver mode. You can also use the remote controller to control your DVD player, CD player, and other components. See page 100 for more details. Receiver For detailed information, see the pages in parentheses.

  • Page 13: Installing The Batteries

    Remote Controller—Continued Installing the Batteries To open the battery compartment, press the small lever and remove the cover. Insert the two supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment. Replace the cover and push it shut. Notes: •...

  • Page 14: Connecting Your Speakers

    Connecting Your Speakers Enjoying Home Theater Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. You can enjoy DVDs featuring Dolby Digital or DTS. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes.

  • Page 15: Speaker Configuration

    Connecting Your Speakers—Continued Speaker Configuration For 7.1-channel surround-sound playback, you need seven speakers and a powered subwoofer. The following table shows which channels you should use based on the number of speakers you have. Number of speakers: ✓ ✓ ✓ Front left ✓...

  • Page 16: Speaker Connection Precautions

    Connecting Your Speakers—Continued Speaker Connection Precautions Read the following before connecting your speakers: • North American models: You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in amp protection circuit may be acti- vated.

  • Page 17: Connecting The Speaker Cables

    Connecting Your Speakers—Continued Connecting the Speaker Cables Strip about 5/8" (15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. Unscrew the terminal. Fully insert the bare wire. Screw the terminal tight. The following illustration shows which speaker should be connected to each pair of terminals.

  • Page 18: Bi-Amping Front Speakers

    Connecting Your Speakers—Continued Bi-amping Front Speakers The FRONT L/R and SURR BACK L/R terminal posts can be used with front speakers and surround back speakers respectively, or bi-amped to provide separate tweeter and woofer feeds for front speakers, providing improved bass and treble performance. •...

  • Page 19: Connecting Antennas

    Connecting Antennas This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

  • Page 20: Connecting An Outdoor Fm Antenna

    Connecting Antennas—Continued Connecting an Outdoor FM Antenna If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft.

  • Page 21: Connecting Your Components

    Connecting Your Components About AV Connections • Before making any AV connections, read the manuals supplied with your other AV components. • Don’t connect the power cord until you’ve completed and double-checked all AV connections. Optical Digital Jacks The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed.

  • Page 22: Connecting Audio And Video Signals To The Av Receiver

    Connecting Your Components—Continued Connecting Audio and Video Signals to the AV Receiver By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver. : Signal Flow Video Audio...
  • Page 23 The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO OUT, use the DTR-5.9’s display when changing settings.

  • Page 24: Connecting A Tv Or Projector

    The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO OUT, use the DTR-5.9’s display when changing settings.

  • Page 25: Connecting A Dvd Player

    Connecting Your Components—Continued Connecting a DVD player Step 1: Video Connection Choose a video connection that matches your DVD player ( , You must connect the AV receiver to your TV with the same type of connection. Step 2: Audio Connection Choose an audio connection that matches your DVD player ( , •...
  • Page 26 Connecting Your Components—Continued Hooking Up the Multichannel Input If your DVD player supports multichannel audio formats such as DVD-Audio and SACD, and it has a multichannel analog audio output, you can connect it to the AV receiver’s multichannel input. Use a multichannel analog audio cable, or several normal audio cables, to connect the AV receiver’s DVD IN FRONT L/R, CENTER, SURR L/R, SURR BACK L/R, and SUBWOOFER jacks to the 7.1-channel analog audio output on your DVD player.

  • Page 27: Connecting A Vcr Or Dvr For Playback

    Connecting Your Components—Continued Connecting a VCR or DVR for Playback With this hookup, you can use the tuner in your VCR or DVR to listen to your favorite TV programs Hint! via the AV receiver, which is useful if your TV has no audio outputs. Step 1: Video Connection Choose a video connection that matches your VCR or DVR ( , connect the AV receiver to your TV with the same type of connection.

  • Page 28: Connecting A Vcr Or Dvr For Recording

    Connecting Your Components—Continued Connecting a VCR or DVR for Recording Step 1: Video Connection Choose a video connection that matches your VCR or DVR ( source to be recorded must be connected to the AV receiver via the same type of connection. Step 2: Audio Connection Choose an audio connection that matches your VCR or DVR ( Connection...

  • Page 29: Connecting A Satellite, Cable, Terrestrial Set-Top Box, Or Other Video Source

    Connecting Your Components—Continued Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs Hint! via the AV receiver, which is useful if your TV has no audio outputs. Step 1: Video Connection Choose a video connection that matches the video source ( , You must connect the AV receiver to your TV with the same type of connection.

  • Page 30: Connecting A Game Console

    Connecting Your Components—Continued Connecting a Game Console Step 1: Video Connection Choose a video connection that matches your game console ( , If you use connection , you must connect the AV receiver to your TV with the same type of connection. Step 2: Audio Connection Choose an audio connection that matches your DVD player ( , •...

  • Page 31: Connecting Components With Hdmi

    Connecting Your Components—Continued Connecting Components with HDMI About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components.

  • Page 32: Making Hdmi Connections

    Connecting Your Components—Continued Making HDMI Connections If you have an HDMI-compatible player, you can connect it to the AV receiver with an HDMI cable. Step 1: Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD player, TV, projector, and so on.

  • Page 33: Connecting A Camcorder Or Other Device

    Connecting Your Components—Continued Connecting a Camcorder or Other Device Step 1: Make the video connection Step 2: Make the audio connection AUX Input Connection AV receiver AUX Input Video AUX Input L-Audio-R Connecting a Power Amplifier If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT jacks, and connect all speakers and the subwoofer to the power amplifier.

  • Page 34: Connecting A Cd Player Or Turntable

    Connecting Your Components—Continued Connecting a CD Player or Turntable ■ CD Player or Turntable (MM) with Built-in Phono Preamp Step 1: Choose a connection that matches your CD player ( , phono preamp. Connect one or the other Connection (CD) must be assigned (see page 45)

  • Page 35: Connecting A Cassette, Cdr, Minidisc, Or Dat Recorder

    Connecting Your Components—Continued Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Step 1: Choose a connection that matches your recorder ( , COAXIAL (CBL/SAT) OPTICAL (CD) DIGITAL Connect one or the other These connections must be assigned (see page 45) •...

  • Page 36: Connecting An Ri Dock

    Connecting Your Components—Continued Connecting an RI Dock Not all iPod models output video. For information about which iPod models are supported by the RI Dock, see the RI Dock’s instruction manual. ■ If Your iPod Supports Video: Connect your RI Dock’s audio output jacks to the AV receiver’s GAME/TV IN L/R jacks, and connect its video output jack to the AV receiver’s GAME/TV IN V jack.

  • Page 37: Connecting Integra/Onkyo Components

    Connecting Your Components—Continued Connecting Integra/Onkyo Step 1: Make sure that each Integra/Onkyo component is connected to the AV receiver with an analog audio cable (RCA). Step 2: Make the necessary connections (see illustration below). Step 3: If you’re using an MD, CDR, or RI DOCK component, change the Input Display (see page 46).

  • Page 38: Turning On The Av Receiver

    The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO OUT, use the DTR-5.9’s display when changing settings.

  • Page 39: First Time Setup

    First Time Setup This section explains the settings that you need to make before using the AV receiver for the very first time. Automatic Speaker Setup With the supplied calibrated microphone, Audyssey 2EQ automatically determines the number of speakers con- nected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening posi-...
  • Page 40 First Time Setup—Continued Put the speaker setup micro- phone at measurement point 1 (page 39), and connect it to the Setup MIC jack. Please place microphone at center of listening area at ear height. Notes: • For all measurements, the micro- phone capsule should point directly at the ceiling.

  • Page 41: Error Messages

    First Time Setup—Continued When the calculations are com- plete, the following screen appears. Auto Speaker Setup Review Speaker configuration Subwoofer Front Center Surround Surr Back Surr Back Ch Save Cancel Use the Up and Down [ buttons to select an option, and then press [Enter].

  • Page 42: Using A Powered Subwoofer

    First Time Setup—Continued Auto Speaker Setup - - - - - Speaker Detect Error - - - - - : Yes : --- : Yes Retry Cancel The right surround back speaker has been detected but the left surround back speaker hasn’t. Auto Speaker Setup - - - - - Speaker Detect Error - - - - - : Error...

  • Page 43: Speaker Settings

    First Time Setup—Continued Speaker Settings If you change these settings, you must run the auto- matic speaker setup again (see page 39). Enter Setup If the impedance of any speaker is 4 ohms or more but less than 6, set the Speaker Impedance to 4 ohms. North American models do not support speakers with an impedance of less than 6 ohms.

  • Page 44: Hdmi Input Setup

    First Time Setup—Continued HDMI Input Setup If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector. These are the default assignments.

  • Page 45: Component Video Input Setup

    First Time Setup—Continued Component Video Input Setup If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 2, you must assign COM- PONENT VIDEO IN 2 to the DVD input selector.

  • Page 46: Changing The Input Display

    First Time Setup—Continued Use the Up and Down [ buttons to select “1. Input Assign,” and then press [Enter]. Use the Up and Down [ buttons to select “1-3. Digital Audio Input,” and then press [Enter]. Use the Up and Down [ buttons to select an input selec- tor, and then use the Left and Right [...

  • Page 47: Automatic Audio Input Selection Setup

    First Time Setup—Continued Automatic Audio Input Selection Setup 2, 3 When an input source is selected, the AV receiver checks the relevant audio inputs for the presence of an audio signal and automatically selects an input. With this set- ting, you can specify which audio inputs the AV receiver will check for signals.

  • Page 48: Playing Your Av Components

    Playing Your AV Components Basic AV Receiver Operation Remote AV receiver controller Remote AV receiver controller Use the AV receiver’s input selector buttons to select an input source. To select an input source with the remote controller, press its Input Selec- tor buttons.

  • Page 49: Common Functions

    Common Functions This section explains functions that can be used with any input source. Press [Receiver] first Dimmer Display Phones Dimmer Setting the Display Brightness You can adjust the brightness of the display. Remote Press the [Receiver] Remote controller Mode button, and then press the remote controller’s [Dimmer] but- ton repeatedly to select: dim, dimmer, or normal brightness.

  • Page 50: Using Headphones

    Common Functions—Continued Using Headphones For private listening, you can connect a pair of stereo headphones (1/4-inch phone plug) to the AV receiver’s Phones jack. Notes: • Always turn down the volume before connecting your headphones. • While the headphones plug is inserted in the PHONES jack, the speakers are turned off.

  • Page 51: Specifying The Digital Signal Format

    Common Functions—Continued Specifying the Digital Signal Format The following table shows the display indicator for each digital signal format. Format Display Dolby Digital Normally, the AV receiver detects the format of digital input signals automatically. However, if you experience either of the following issues when playing PCM or DTS sources, you can specify the signal format manually.

  • Page 52: Listening To The Radio

    Listening to the Radio AM Frequency Step Setup (on some models) 2, 3 1, 5 For AM tuning to work properly, you must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted. Press the [Receiver] button, fol- lowed by the [Setup] button.

  • Page 53: Listening To Am/Fm Stations

    Listening to the Radio—Continued Listening to AM/FM Stations Tuning Mode Tuner With the built-in tuner, you can enjoy AM and FM radio stations and store your favorite stations as presets for easy selection. Use the [Tuner] input selector button to select AM or FM. In this example, FM has been selected.
  • Page 54 Listening to the Radio—Continued ■ Tuning into Stations by Frequency You can tune into AM and FM stations directly by enter- ing the appropriate frequency. Number buttons D.TUN Press the [Tuner] button repeat- edly to select AM r FM, followed by the [D.TUN] button.

  • Page 55: Presetting Am/Fm Stations

    Listening to the Radio—Continued Presetting AM/FM Stations 2, 4 You can store a combination of up to 40 of your favorite AM and FM radio stations. Tune into the AM or FM station you want to store as a preset. Press the [Memory] button.

  • Page 56: Positioning The Antenna

    Listening to the Radio—Continued Listening to SIRIUS Satellite Radio (North American Models Only) Important SIRIUS Satellite Radio Information SIRIUS is available in the US for subscribers with addresses in the continental US and is available in Canada for subscribers with a Canadian address. To get SIRIUS Satellite Radio a subscription and compatible tuner and antenna are required and sold separately.

  • Page 57: Setting The Satellite Radio Mode

    Listening to the Radio—Continued Setup Setting the Satellite Radio Mode Before you can listen to SIRIUS Satellite Radio, you must set the Satellite Radio mode to SIRIUS. Press the [Receiver] Remote Mode button, followed by the [Setup] button. The main menu appears onscreen. Menu 1.

  • Page 58: Selecting Sirius Satellite Radio Channels

    Listening to the Radio—Continued Signing Up for SIRIUS Satellite Radio Before you can use SIRIUS Satellite Radio, you must first sign up for an account. You’ll need a major credit card and your SIRIUS Satellite Radio ID, which you can get from the AV receiver, as explained below, or from the SiriusConnect Home tuner package.
  • Page 59 Listening to the Radio—Continued ■ Direct Tuning You can select a SIRIUS Satellite Radio channel directly by entering its number. Press the [Receiver] Remote Mode button, followed by the [D.TUN] button. The [Receiver] button flashes. Within 8 seconds, use the num- ber buttons to enter the channel number.

  • Page 60: Selecting Presets

    Listening to the Radio—Continued Setup D.TUN ■ Selecting Presets To select a preset, use the Preset AV receiver ] buttons, or the remote controller’s CH [+/–] button. Remote controller You can also use the remote con- troller’s number buttons to select a preset directly.

  • Page 61: Changing The Pin Number

    Listening to the Radio—Continued Use the number buttons to enter the 4-digit PIN number. Use the Left and Right [ buttons to select a number on the screen, and then press [Enter]. Repeat this for each of the four digits in the PIN number. If you’re entering the PIN number for the very first time, the PIN is stored, and the following screen appears.
  • Page 62 Listening to the Radio—Continued Setup D.TUN Use the Up and Down [ buttons to select “SIRIUS Paren- tal Lock,” and then press [Enter]. The SIRIUS Parental Lock screen appears. SIRIUS Parental Lock Enter Code Use the number buttons to enter the old 4-digit PIN number.

  • Page 63: Displaying Sirius Satellite Radio Information

    Listening to the Radio—Continued Displaying SIRIUS Satellite Radio Information AV receiver Press the [Display] button repeatedly to cycle through the available information. Remote controller The following information can be displayed: Channel name ↓ Channel number & preset number ↓ Category ↓...
  • Page 64 Listening to the Radio—Continued Use the Up and Down [ buttons to select “Antenna Aim- ing,” and then press [Enter]. The Antenna Aiming screen appears. Position the SiriusConnect Home antenna so that as many bars as possible (up to 3) appear on the SIRIUS Satellite signal strength meter.

  • Page 65: Using Rds (European Models Only)

    Listening to the Radio—Continued Using RDS (European models only) RDS only works in areas where RDS broadcasts are available. When tuned to an RDS station, the RDS indi- cator appears. RDS indicator ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radio signals.

  • Page 66: Displaying Radio Text (Rt)

    Listening to the Radio—Continued Displaying Radio Text (RT) RT/PTY/TP When tuned to an RDS station that’s broadcasting text information, the text can be displayed. Press the [RT/PTY/TP] button RT/PTY/TP once. The RT information scrolls across the display. Notes: • The message “Waiting” may appear while the AV receiver waits for the RT information.

  • Page 67: Using The Listening Modes

    Using the Listening Modes Selecting the Listening Modes For a description of each listening mode, see “About the Listening Modes” on page 74. • The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, or HDMI).

  • Page 68: Listening Modes Available For Each Source Format

    Using the Listening Modes—Continued Listening Modes Available for Each Source Format Analog and PCM Sources Source format Button Listening Mode Mono Multichannel Neo:6 Dolby PLII Movie/ Dolby PLIIx Movie DolbyEX [Movie/TV] Neo:6 Cinema *5 *6 MonoMovie *5 *6 TV Logic AllChStereo FullMono Direct...
  • Page 69 Using the Listening Modes—Continued Dolby Digital and Dolby Digital Plus Sources Source format Button Listening Mode Mono DolbyDigital DolbyDigital Plus Neo:6 Dolby PLII Movie/Dolby PLIIx Movie DolbyEX [Movie/TV] Neo:6 Cinema MonoMovie TV Logic AllChStereo FullMono Direct Stereo DolbyDigital DolbyDigital Plus Neo:6 Dolby PLII Music/Dolby PLIIx Music [Music]...
  • Page 70 Using the Listening Modes—Continued DTS Sources Source format Button Listening Mode Mono DTS, DTS 96/24 DTS-ES Discrete/Matrix Neo:6 Dolby PLII Movie/Dolby PLIIx Movie DolbyEX [Movie/TV] Neo:6 Cinema *4 *5 MonoMovie *4 *5 TV Logic AllChStereo FullMono Direct Stereo DTS, DTS 96/24 DTS-ES Discrete/Matrix Neo:6 Dolby PLII Music/Dolby PLIIx Music...
  • Page 71 Using the Listening Modes—Continued TrueHD Sources Source format Button Listening Mode Mono TrueHD Neo:6 Dolby PLII Movie/Dolby PLIIx Movie [Movie/TV] DolbyEX Neo:6 Cinema AllChStereo FullMono Direct Stereo TrueHD Neo:6 [Music] Dolby PLII Music/Dolby PLIIx Music DolbyEX Neo:6 Music AllChStereo FullMono TrueHD Neo:6 Dolby PLII Game/Dolby PLIIx Game...
  • Page 72 Using the Listening Modes—Continued DTS-HD Sources Button Listening Mode Mono DTS-HD High Resolution DTS-HD Master Audio Neo:6 [Movie/TV] Dolby PLII Movie/Dolby PLIIx Movie DolbyEX Neo:6 Cinema AllChStereo FullMono Direct Stereo DTS-HD High Resolution DTS-HD Master Audio Neo:6 [Music] Dolby PLII Music/Dolby PLIIx Music DolbyEX Neo:6 Music AllChStereo...
  • Page 73 Using the Listening Modes—Continued DTS Express and DSD Sources Source format Button Listening Mode Mono DTS Express Neo:6 Dolby PLII Movie/Dolby PLIIx Movie DolbyEX [Movie/TV] Neo:6 Cinema MonoMovie TV Logic AllChStereo FullMono Direct Stereo DTS Express Neo:6 Dolby PLII Music/Dolby PLIIx Music [Music] DolbyEX Neo:6 Music...

  • Page 74: About The Listening Modes

    Using the Listening Modes—Continued About the Listening Modes The AV receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. The illustration shows which speakers are active in each listening mode with 7.1 channel speaker sys- tem.
  • Page 75 Using the Listening Modes—Continued DTS-ES Matrix This mode is for use with DTS-ES Matrix soundtracks, that use a matrix-encoded back-channel for 6.1/7.1- channel playback. Use it with DVDs that bear the DTS- ES logo, especially those with a DTS-ES Matrix soundtrack.

  • Page 76: Recording

    Recording This section explains how to record the input source and how to record audio and video from separate sources. Notes: • The surround sound and DSP listening modes cannot be recorded. • Copy-protected DVDs cannot be recorded. • Sources connected to the analog multichannel input cannot be recorded.

  • Page 77: Adjusting The Listening Modes

    Adjusting the Listening Modes Using the Audio Adjust Settings With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. Press the [Receiver] Remote Mode button, followed by the [Setup] button. The main menu appears onscreen. If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.
  • Page 78 Adjusting the Listening Modes—Continued ■ Center Width With this setting, you can adjust the width of the sound from the center speaker when using the Dolby Pro Logic IIx Music listening mode. Normally, if you’re using a center speaker, the center channel sound is output by only the center speaker.

  • Page 79: Using The Audio Settings

    Adjusting the Listening Modes—Continued Using the Audio Settings You can change various audio settings by pressing the [Audio] button. Note: • When the Audio TV Out setting is set to On (page 91), the [AUDIO] button is disabled. Press the [Receiver] button fol- lowed by the [Audio] button.

  • Page 80: Speaker Levels

    Adjusting the Listening Modes—Continued Audyssey Dynamic EQ ■ DynamicEQ With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorat- ing sound quality as volume is decreased by taking into account human perception and room acoustics.

  • Page 81: Listening Mode Presets

    Adjusting the Listening Modes—Continued Listening Mode Presets On the Listening Mode Preset menu, you can specify a default listening mode for each of the audio formats sup- ported by each input selector. The AV receiver will then select the listening mode automatically depending on the format of the input signal.

  • Page 82: Advanced Setup

    Advanced Setup Speaker Setup This section explains how to check the speaker settings and how to set them manually, which is useful if you change a speaker after performing the automatic speaker setup. Some of the speaker settings are set automatically by the Automatic Speaker Setup function (see page 39).
  • Page 83 Advanced Setup—Continued Use the Down [ ] button to select “Surround,” and then use the Left and Right [ tons to select a crossover fre- quency. If no surround left and right speakers are connected, select None. Note: • Cannot select Full Band if Front (step 5) is set to anything other than Full Band.

  • Page 84: Speaker Distance

    Advanced Setup—Continued Double Bass This setting is not set automatically by the Automatic Speaker Setup function (see page 39). With the Double Bass function, you can boost bass out- put by feeding bass sounds from the front left, right, and center channels to the subwoofer.
  • Page 85 Advanced Setup—Continued Use the Down [ ] button to select “Left”, and use the Left and Right [ ] buttons to specify the distance for the front speakers, then press the Down ] button to select the next speaker. Repeat step 6 for all speakers. Note: •...

  • Page 86: Equalizer Settings

    Advanced Setup—Continued Equalizer Settings These settings are set automatically by the Automatic Speaker Setup function (see page 39). Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 85. Press the [Receiver] Remote Mode button, followed by the [Setup] button.

  • Page 87: Source Setup

    Advanced Setup—Continued Source Setup This section explains items on the Source Setup menu. Items can be set individually for each input selector. Press the input selector buttons to select an input source, and then press the [Receiver] Remote Mode button. Press the [Setup] button.

  • Page 88: Miscellaneous Setup

    Advanced Setup—Continued Miscellaneous Setup This section explains items on the Miscellaneous menu. Press the [Receiver] Remote Mode button, followed by the [Setup] button. The main menu appears onscreen. If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

  • Page 89: Hardware Setup

    Remote Control ■ Remote ID When several Integra/Onkyo components are used in the same room, their remote ID codes may overlap. To dif- ferentiate the AV receiver from the other components, you can change its remote ID from 1, the default, to 2 or Note: •...

  • Page 90: Output Resolution

    Advanced Setup—Continued Use the number buttons to enter ID 1, 2, or 3. The Remote indicator flashes twice. Zone 2 See “Zone 2” on page 93. Tuner ■ AM Frequency (on some models) See “AM Frequency Step Setup (on some models)” on page 52.

  • Page 91: Lip Sync

    • RIHD, which stands for Remote Interactive over HDMI, is the name of the system control function found on Integra/Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Con- trol), which allows system control over HDMI and is part of the HDMI standard.

  • Page 92: Lock Setup

    Advanced Setup—Continued TV Control Select Enable to control the AV receiver from an RIHD- compatible TV connected via HDMI. Disable: TV Control disabled. Enable: TV Control enabled. Notes: • Select Disable if your TV is incompatible or you’re not sure about its compatibility. •...

  • Page 93: Zone 2

    Zone 2 In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room. Connecting Zone 2 There are two ways you can connect Zone 2 speakers: 1.

  • Page 94: Powered Zone 2 Setting

    Zone 2—Continued Powered Zone 2 Setting If you’ve connected your Zone 2 speakers to the AV receiver, as explained in “Connecting Your Zone 2 Speakers Directly to the AV receiver” on page 93, you must set the Powered Zone 2 setting to Act (Activated). Enter Setup Press the [Receiver] Remote...

  • Page 95: Zone 2 Out Settings

    Zone 2—Continued Input Selector Enter Setup Zone 2 Out Settings If you’ve connected your Zone 2 speakers to an amp with no volume control, set the Zone 2 Out setting, to Variable so that you can set the zone’s volume, balance, and tone on the AV receiver.

  • Page 96: Using Zone 2

    Zone 2—Continued Using Zone 2 This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 from the AV receiver Zone 2 Tone +, –...
  • Page 97 Zone 2—Continued To turn off Zone 2, press the [Zone 2] button, followed by the [On/Standby] button. Note: • To control Zone 2, you must press the remote control- ler’s [Zone 2] button first. Adjusting the Volume of Zone 2 Remote On the remote controller, press controller...

  • Page 98: Using The 12V Triggers

    Zone 2—Continued Using the 12V Triggers The 12V triggers A, B, and C can be used to turn on 12V trigger-capable components automatically when they are selected as the input source. The triggers can be set so that they activate when a connected component is selected as the input source for the main room or Zone 2.

  • Page 99: Using The Remote Controller In Zone 2 And Multiroom Control Kits

    Zone 2—Continued Using the Remote Controller in Zone 2 and Multiroom Control Kits To control the AV receiver with the remote controller while you’re in Zone 2, you’ll need a commercially available multiroom remote control kit for each zone. • Multiroom kits are made by Niles and Xantech. These kits can also be used when there isn’t a clear line of sight to the AV receiver’s remote sensor, such as when it’s installed inside a cabinet.

  • Page 100: Controlling Other Components

    You do not need to enter a remote control code to control these components. For details on controlling these components, see the pages indicated. Integra/Onkyo DVD player (page 103) Integra/Onkyo CD player (page 106) Onkyo cassette recorder with (page 108) Entering Remote Control Codes You’ll need to enter a code for each component that you...

  • Page 101: Remote Control Codes For Integra/Onkyo Components Connected Via

    Press the Remote Mode button, point the remote controller at the AV receiver, and operate the component. If you want to control an Integra/Onkyo component by pointing the remote controller directly at it, or you want to control an Integra/Onkyo component that’s not con-...

  • Page 102: Controlling A Tv

    Controlling Other Components—Continued Controlling a TV By pressing the [TV] or [Game/TV] Remote Mode but- tons that’s been programmed with the remote control code for your TV (TV/DVD combination or TV/VCR combination), you can control your TV with the follow- ing buttons.

  • Page 103: Controlling A Dvd Player, Or Dvd Recorder

    Controlling Other Components—Continued Controlling a DVD Player, or DVD Recorder By pressing the Remote Mode button that’s been pro- grammed with the remote control code for your DVD player (HD DVD, Blu-ray, or TV/DVD combination), you can control your player with the following buttons. The [DVD] Remote Mode button is preprogrammed with the remote control code for controlling an Inte- gra/Onkyo DVD player.

  • Page 104: Controlling A Vcr Or Dvr

    Controlling Other Components—Continued Play Mode button Selects play modes on components with selectable play modes. CLR button Cancels functions and clears entered numbers. Controlling a VCR or DVR By pressing the Remote Mode button that’s been pro- grammed with the remote control code for your VCR (TV/VCR, DVR, DBS/DVR combination or cable/DVR combination), you can control your video recorder with the following buttons.

  • Page 105: Controlling A Satellite Receiver Or Cable Receiver

    Controlling Other Components—Continued Controlling a Satellite Receiver or Cable Receiver By pressing the Remote Mode button that’s been pro- grammed with the remote control code for your satellite receiver, cable receiver, or DVD recorder (DBS/DVR combination or cable/DVR combination), you can con- trol your player with the following buttons.

  • Page 106: Controlling A Cd Player, Cd Recorder, Or Md Player

    CD recorder, or MD player, you can control your player with the following buttons. The [CD] Remote Mode button is preprogrammed with the remote control code for controlling an Integra/Onkyo CD player. For details on entering a remote control code for a differ- ent component, see page 100.

  • Page 107: Controlling An Ri Dock

    Controlling Other Components—Continued Controlling an RI Dock By pressing the Remote Mode button that’s been pro- grammed with the remote control code for your RI Dock, you can control your iPod in the RI Dock with the fol- lowing buttons. For details on entering a remote control code, see page 100.

  • Page 108: Controlling A Cassette Recorder

    Controlling Other Components—Continued Fast Forward [ ] button Press and hold to fast forward. Stop [ ] button Stops playback and displays a menu. Play Mode button Selects play modes on components with selectable play modes. Controlling a Cassette Recorder By pressing the Remote Mode button that’s been pro- grammed with the remote control code for your cassette recorder, you can control your cassette recorder with the...

  • Page 109: Troubleshooting

    Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact the dealer. If you can’t resolve the issue yourself, try resetting the AV receiver before contacting the dealer. To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VCR/DVR] button, press the [On/Standby] button.
  • Page 110 Troubleshooting—Continued • Not much sound may be produced by the surround back speakers with some sources. • Check the Speaker Configuration (page 82). • While Powered Zone 2 is being used, playback in the main room is reduced to 5.1-channels and the sur- round back speakers produce no sound (page 94).
  • Page 111 • With some AV components, certain buttons may not work as expected, and some may not work at all. • To control an Integra/Onkyo component that’s con- nected via , point the remote controller at the AV receiver.
  • Page 112 5 seconds, and then plug it back in again. Integra/Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by this unit’s malfunction. Before you record important data, make sure that the material will be recorded cor- rectly.

  • Page 113: Video Outputs

    Specifications Amplifier Section Rated Output Power North American: 90 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20Hz to 20kHz, with a maximum total harmonic distortion of 0.08% (FTC) 105 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1kHz, with a maximum total harmonic distortion of 0.7% (FTC) 110 watts minimum continuous power per channel, 6 ohm...

  • Page 114: Video Resolution Chart

    Video Resolution Chart The following tables show how video signals at different resolutions are output by the AV receiver. NTSC Output Input 1080P 1080i 720P 480P ✔ 1080P 1080i HDMI 720P 480P 480i 1080P 1080i COMPONENT 720P 480P 480i VIDEO 480i COMPOSITE 480i...

  • Page 115: Onscreen Setup Menus

    The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO OUT, use the DTR-5.9’s display when changing settings.
  • Page 116 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION I0804-1 Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 SN 29344688 (C) Copyright 2008 ONKYO CORPORATION Japan.

Table of Contents

Save PDF