Integra DTR-5.3 Instruction Manual page 25

Integra av receiver instruction manual
Hide thumbs Also See for DTR-5.3:
Table of Contents

Advertisement

Connections (DTR-5.3)
Connecting a DVD Player with 2-Channel (L/R) Audio Output
FM 75
ANTENNA
12 V
TRIGGER
OUT
56K
A
B
REMOTE
CONTROL
DIGITAL INPUT
OPTICAL
2
CD
L
SUBWOOFER
PRE OUT
R
: Signal flow
3. Connecting a DVD player (DVD)
Using an RCA video cable, connect the video output jack (composite)
of the DVD player to the DVD VIDEO IN jack of the DTR-5.3. Or if
the DVD player has an S video output jack, connect it to the DVD S
VIDEO IN jack with an S video cable. Or if the device has component
video outputs, connect them to the COMPONENT VIDEO INPUT 1
or 2 jacks on the DTR-5.3.
With the initial settings of the DTR-5.3, the DVD input source is
set for the COMPONENT VIDEO INPUT 1 jacks.
If you connect the DVD player to the COMPONENT VIDEO
INPUT 2 jacks, this must be changed at "Input Setup" →
"Component Video" (see page 53).
Using an RCA audio connection cable, connect the audio output
jacks of the DVD player to the DVD FRONT L/R jacks of the DTR-
5.3. Make sure that you properly connect the left channel to the L
jack and the right channel to the R jack.
If the device has a 5.1-channel output, connect the DVD FRONT L/
R, SURR L/R, CENTER, and SUBWOOFER (5.1-channel input)
jacks of the DTR-5.3 to the 5.1-channel output jacks of the DVD
player. Make sure that you properly connect the left channels to the
L jacks and the right channels to the R jacks.
If the device has a digital output, connect it to either the DIGITAL
INPUT COAXIAL jack or the DIGITAL INPUT OPTICAL jack of
the DTR-5.3 depending on the type of connector on the DVD player.
With the initial settings of the DTR-5.3, the DVD input source is
set for digital input at the COAXIAL jack (COAX).
If the digital connection is made at a different jack, this must be
changed at "Input Setup" → "Digital Input" (see page 53).
Note:
If the DVD player has both 5.1-channel audio outputs and 2-channel
audio outputs, and you want to connect the DVD player only using
the FRONT L/R jacks on the DTR-5.3, use the 2-channel audio
output jacks on the DVD player.
AM
COMPONENT VIDEO
INPUT 2
INPUT 1
RS232
IR OUT
LINE IN
40K
ZONE 2
DC IN
OUT
24V 1A
A
L
B
R
VIDEO 3
VIDEO 2
VIDEO 1
DVD
DIGITAL
DIGITAL
IN
IN
OUT
IN
IN
OUTPUT
INPUT
OPTICAL
COAXIAL
V
1
S
TAPE
IN
OUT
IN
IN
IN
OUT
IN
FRONT
L
R
VIDEO 3
VIDEO 2
VIDEO 1
OUTPUT
Y
Y
P
P
B
P
P
R
MONITOR
IR
OUT
OUT
V
IN
S
SURR
CENTER
L
R
SUB
WOOFER
DVD
L (white)
R (red)
Component video output
B
R
Video ouput
S video output
3. DVD player (DVD)
Analog audio output
Digital audio output
(coaxial)
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtr-6.3

Table of Contents