Controlling An Integra/Onkyo Dvd Player - Integra DTR-5.3 Instruction Manual

Using remote controller
On
Return
ENTER,
DISC
Top Menu
Audio SEL
Angle
64

Controlling an Integra/Onkyo DVD player

The
connected to the DTR-6.3/5.3 (see page 29).
1. Press the DVD Mode button.
2. Press the desired operation button.
Operation buttons:
On: Turns DVD player on and off
Standby: Turns DVD player off (Some sets may not respond to this
button. In this case, use the On button to put the DVD player in the
standby state.)
Standby
Setup: Displays OSD Menu of the DVD player
DVD Mode
ENTER: Enter button for the OSD Menu of the DVD player
Setup Return: Return button for the OSD Menu of the DVD player
Top Menu or Menu: Displays menu screens recorded on DVD
VOL
media
Disc
Menu
Muting Audio SEL: Selects audio or language track (if recorded on the
DVD)
Subtitle
Angle: Selects camera angle (if recorded on the DVD)
DVD
operation Subtitle: Selects subtitle language (if recorded on the DVD)
buttons
Search: Searches for location on disc to start playback
Random: Random playback
Numeric keys
: Stop
Search
: Pause
: Opens/closes disc tray
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL
Muting: Activates muting function at DTR-6.3/5.3
Note:
When operating an Integra/Onkyo DVD player directly with the
remote controller without connecting the
programming is necessary (see page 66).
connector of the Integra/Onkyo DVD player must be
The DVD Mode button lights green.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Integra/Onkyo DVD
player.
: Moves cursor in the OSD Menu of the DVD player
: Selects disc in DVD changer
: Chapter/Track down
: Chapter/Track up
: Play
: Fast reverse
: Fast forward
: Adjusts volume at DTR-6.3/5.3
terminals, pre-