Using remote controller
RCVR Mode
CH
RCVR Mode
62
Overview
The RC-481M remote controller is a useful tool that can not only
operate the DTR-6.3/5.3, but also all the other components of your
home theater as well. To operate any component, first press the
Mode button on the remote controller that corresponds to the
component that you wish to control. Then simply press the desired
operation button and the component will operate accordingly. For
example, if you wish to select the CD input source at the DTR-6.3/
5.3 with the remote controller, first press the RCVR Mode button to
select the DTR-6.3/5.3 and then press the CD (Input Selector)
button.
Calling up a preset radio station
1. Press the RCVR Mode button.
2. Press the TUN input selector button.
3. Press the desired operation button.
VOL
Operation buttons:
CH
Muting
You may also use the following buttons:
VOL
Muting: Activates muting function at DTR-6.3/5.3
TUN
Controlling an Onkyo cassette tape deck
The
connected to the DTR-6.3/5.3 (see page 29).
1. Press the RCVR Mode button.
2. Press the desired operation button.
Operation buttons:
VOL
: Stop
Muting
TAPE
operation
buttons
Rec: Record/Pause
: Reverse playback
You may also use the following buttons:
VOL
Muting: Activates muting function at DTR-6.3/5.3
Note:
Even for devices with the
may cause them not to work properly.
The RCVR Mode button lights green.
: Selects the desired preset station number
: Adjusts volume at DTR-6.3/5.3
connector of the Onkyo cassette tape deck must be
The RCVR Mode button lights green.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo cassette tape deck.
: Play
: Rewind
: Fast forward
: Skips to beginning of next track during playback
: Skips to beginning of current track during playback
: Adjusts volume at DTR-6.3/5.3
and
buttons, signal discrepancies