Video Input Setup - Integra DTR-6.9 Instruction Manual

First Time Setup—Continued

Video Input Setup

HDMI Input Setup
If you connect a video component to HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
If you've connected your TV to the AV receiver with an
HDMI cable, you can set the AV receiver so that com-
posite video, S-Video, and component video sources are
upconverted* and output by the HDMI OUT. You can set
this for each input selector by selecting the "- - - - -"
option.
Composite video, S-Video,
component video
IN
OUT
Composite video, S-Video,
component video
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select "1. Input Assign",
and then press [Enter].
The "Input Assign" menu appears.
1. Input Assign
1. HDMI Input
2. Component Video Input
3. Digital Audio Input
3
4
HDMI
HDMI
5
Notes:
• For composite video, S-Video, and component video
upconversion for the HDMI OUT, the HDMI Input
setting must be set to "- - - - -". See page 22 for more
information on video signal flow and upconversion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See "Digital Input Setup" on page 43.
• The TUNER input selector cannot be assigned and is
fixed at the "- - - - -" option.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Use the Up and Down [ ]/[ ] but-
tons to select "1. HDMI Input",
and then press [Enter].
The "HDMI Input" menu appears.
1–1. HDMI Input
DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME/TV HDMI4
AUX - - - - -
TAPE - - - - -
TUNER - - - - -
CD - - - - -
PHONO - - - - -
Use the Up and Down [ ]/[ ] but-
tons to select an input selector,
and use the Left and Right [ ]/
[ ] buttons to select:
HDMI1, HDMI2, HDMI3, HDMI4:
Select the HDMI IN to which
the video component has
been connected.
- - - - -: Output composite video,
S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in "Compo-
nent Video Setup" (see
page 42).
Each HDMI IN cannot be assigned to
more than one input selector. When
HDMI1 - HDMI4 have already been
assigned (as shown in the Step 3 illus-
tration), you must set first any unused
input selectors to "- - - - -" or you will
be unable to assign HDMI1 - HDMI4
to input selector.
Press the [Setup] button.
The setup menu closes.
41