Install The Lower Roller Assembly, Stepper Motor And Vacuum Fan; Stepper Motor Removal/Installation - ENCAD CADJET Service Manual

11. Remove the Stepper Motor Extension Spring from the Stepper
Motor and the post on the Left Lower Drive Shaft Bracket. See
Figure 5-25.
12. Remove the hardware securing the Stepper Motor to the Left
Lower Drive Shaft Bracket and remove the Stepper Motor.
Install the Lower Roller Assembly, Stepper Motor
and Vacuum Fan
1. Loosely attach the Stepper Motor to the Lower Roller bracket using
Stepper Motor hardware as shown in Figure 5-19.
Figure 5-25. Stepper Motor Removal/Installation.
CadJet 3D Service Manual
Assembly\Disassembly 5-47