Miter Gauge Operation - Jet JWTS-10JF Operating Instructions And Parts Manual

Miter Gauge Operation

1. Operate the miter gauge by loosening the lock
knob (A, Fig. 27) and turning the miter body
(B, Fig. 27) to the desired angle. To move the
gauge beyond the index stops of 45º and 90º,
flip down the stoplink (C, Fig. 27).
2. Adjust the index stops by turning one of three
adjustment screws (D, Fig. 27).
Note: Always make test cuts. Do not rely solely on
miter gauge indicator marks.
20
Figure 27