Contents Of The Shipping Cartons; Table Saw Carton; Tools Included For Assembly; Tools Required For Assembly - Jet JWTS-10JF Operating Instructions And Parts Manual

Shipping Contents
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury!

Contents of the Shipping Cartons

Table Saw Carton

1 ea Table Saw
2 ea Extension Wing
4 ea Stand Leg
4 ea Top Brace
4 ea Cross Brace
1 ea Motor
1 ea Table Insert
1 ea Belt Guard
1 ea V-Belt
1 ea Motor Plate
1 ea Push Stick
1 ea Saw Blade
1 ea Miter Gauge Assembly
1 ea Blade Guard Assembly
1 ea Motor Mounting Bracket
1 ea Belt Guard Bracket
1 ea Blade Guard Set Bar
1 Hardware Pack – Stand Assembly (IV)
1 Hardware Pack – Motor Assembly (III)
1 Hardware Pack – Extension Wing Assembly (I)
1 Hardware Pack – Blade Guard Assembly (II)
1 ea Dust Collector Adapter
2 ea Handwheel Assembly Package
1 ea Fence Body
1 ea Front Rail (Split Rail)
1 ea Rear Rail (Split Rail)
1 ea Fence
1 ea Bag Assembly Hardware

Tools Included for Assembly

1 Arbor/Blade Guard Bracket Wrench
1 Hex Wrench (3mm)

Tools Required for Assembly

1 No. 2 or No. 3 Flat-Head Screwdriver
1 No. 1 and No. 2 Cross Point Screwdrivers
1 6"– 8" Adjustable Wrench
1 Accurate Straight Edge (approximately 2 ft)
1 5mm Hex Wrench
1 10mm Box Wrench
1 12mm Box Wrench
1 13mm Box Wrench
1 17mm Box Wrench
Note: Use of sockets and ratchets will speed
assembly time but are not required.
10