Setting Favorite Channels; Starting A Scan - Icom IC-M73 Instruction Manual

Setting Favorite channels

For more efficient scanning, add desired channels as Favorite
channels, or clear the Favorite for unwanted channels.
Untagged channels will be skipped during scanning. Favor-
ite channels can be independently assigned to each channel
group independently.
(USA, INT, CAN, ATIS)
q
Select the desired channel to set as a Favorite channel.
w
Hold down ] for 1 second to set the displayed chan-
nel as a Favorite channel.
" appears on the function display.
e
To cancel the Favorite channel setting, hold down
for 1 second.
" disappears.
lected Channel Group
While holding down ], turn ON power to clear all the
Favorite channel settings in the channel group.
[Example]: Starting a normal scan.
SCAN OPERATION (Except for the Dutch version)
]
-
Scan starts
Push
"SCAN" indication blinks

Starting a scan

First, set the weather alert function, priority scan function,
scan resume timer and auto scan function, using the SET
mode.
(pp. 26, 27)
q Make sure the desired channel group
is selected. Move between channel groups by repeat-
ATIS)
edly pushing
weather channel with
* For only the USA, EXP, and AUS versions.
w Push
to start a priority or normal scan.
When a signal is received, the scan pauses until the signal dis-
appears, or resumes after pausing 5 seconds, depending on the
scan resume timer setting. (Channel 16 is still monitored during
a priority scan.)
[Y]/[Z] to check the scanning of Favorite channels,
change the scanning direction or resume the scan manually.
e To stop the scan, push
When
signal, "SCAN" indica-
tion blinks and audio
is heard.
5
(e.g., USA, CAN, INT,
for 1 second at a time.
and [Y]/[Z].
.
Push
receiving a
to stop the scan
2
4
5
7
8
9
15