Table of Contents
Advertisement
Outlet box
Black (hot)
Black ("AC IN L")
Receiver
Black ("to motor L")
White ("to motor N")
Blue ("for light")
Ground
(green)
Blue (light)
Black (motor)
Fan
Figure 13
Step 1. Tuck connections neatly into ceiling
outlet box.
Step 2. Slide the canopy up to ceiling and
White (neutral)
over the two crews on hanger bracket. Rotate
Green or bare
canopy clockwise. Next, while holding the
copper (ground)
canopy with one hand, slide the canopy cover
White ("AC IN N")
over the screws and rotate clockwise until
tight. Note: adjust the canopy screws as
necessary until the canopy and canopy cover
are snug. (Fig. 14)
(Connect to
ground wire on
hanger bracket
if no house
ground wire
exists.)
White (neutral)
Finishing the Installation 6.
Outlet box
Hanger
bracket
Hanger
ball
Figure 14
Canopy
Canopy
cover
Advertisement
Table of Contents
