Car Search Mode; Dual Stage Shock Sensor; Remote Sensor By Pass; Valet Mode - Eaglemaster E1 Plus Instruction Manual

2-way lcd car alarm system with command confirmation
Table of Contents

Advertisement

- Car search mode:

The system provide a feature to easy find your car position, simply press button
when in armed after 8sec. The system will respond by 5 lights flash.

- Dual stage shock sensor:

This device only activates after 8 seconds of arming state; this is preventing from the
weak impact caused by the driver while leaving the car.
The device operates:
-Light impact will activate the 1st stage sensor by giving 4 short warning chirps. 2-way
remote will respond 4 beeps and flashing icon as under.
2-way LCD display :
-Heavy impact will activate the 2nd stage sensor and trigger the alarm for 30sec. 2-way
remote will respond melody and flashing icon as under.
2-way LCD display :
NOTE: Adjustments are made via the rotary control above the shock sensor.

- Remote sensor by pass :

This system offer 2stage sensor optional. Within 8sec. after set arming, to press button
once , the system will give 2 short chirps and 2 lights flash, thus the 1st stage shock
sensor has been turn off.
Press button
flash, thus the 2nd stage shock sensor has been turn off.
If press button
turn ON again.
Note: - if remote sensor bypassed, it will be detected again by next arming.
- if armed with silent mode, to operate sensor bypass will only indicate by lights flash.

- Valet mode:

If you are going to have your vehicle serviced, parked by a valet or washed you will want to
put your security system Into valet mode. To enter valet mode disarm the system and turn
Ignition switch to ON position , then press button
give 1 long with 1 short chirp and LED light ON to confirm the system is in valet mode.
2-way LCD display :
When the system is in the valet mode it can not be armed. The door lock and unlock will
function as keyless entry system.
To EXIT: Turn Ignition switch to ON position , then press button
you will hear siren provide 1 long with 2 short chirps and LED light OFF to confirm exit this
mode and in alarm mode. The 2-Way remote will respond 1 long and 2 short beeps.
Note: While in the Valet mode, each time when Ignition switch has been turn off, the siren
will provide 2 chirps for warning sound.
once again, within 8sec. the system will give 3 short chirps and 3 lights
once (at 3 times) again within 8sec. of arming the shock sensor will
+ 4 beeps sound
+ Melody sound
+
for over 2 seconds until siren
+ 1 long + 1 short beep sound
-9-
once
+
for over 2seconds,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents