Unpacking The Zoneflex Access Point; Package Contents; Mounting Kit Contents - Ruckus Wireless ZoneFlex 7762 Installation Manual

Unpacking the ZoneFlex Access Point

Package Contents

2
Unpacking the ZoneFlex Access Point
1. Open the AP package, and then carefully remove the contents.
2. Return all packing materials to the shipping box, and put the box away in a dry location.
3. Verify that all items listed in
Check each item for damage. If any item is damaged or missing, notify your authorized
Ruckus Wireless sales representative.
Package Contents
A complete AP package contains all of the items listed below:
ZoneFlex 7762 AC Outdoor Access Point
■
Mounting kit (see
■
AC power cable end connector
■
Two M 25 cable glands
■
Two M 25 blanking caps
■
Ground wire (one meter long) with lug
■
Service Level Agreement / Limited Warranty Statement
■
Regulatory Statement
■
This Installation Guide
■

Mounting Kit Contents

Mounting bracket (1 piece)
■
Extension bracket (1 piece)
■
Hanger mount (1 piece)
■
M8 hex bolt (2 pieces)
■
M8 spring lock washer (2 pieces)
■
M8 flat lock washer (2 pieces)
■
SAE32 steel clamps, 2.5-inch diameter (4 pieces)
■
.250-28 x .625-inch machine screws with split lock and flat lock washers (4 pieces)
■
2
Package Contents
"Mounting Kit Contents"
below are included in the package.
for details)