Maintenance Of The Dispensing System - Miele G 7883 Operating Instructions Manual

Adding cleaning agent
Taking the effect on the environment
into consideration, please bear the
following points in mind when selecting
a cleaning agent:
^ What level of alkalinity is required to
achieve the correct level of cleaning?
^ Is active chlorine required for
disinfection or oxydation (pigment
removal)?
^ Are tensides required, in particular
for dispersal and emulsification?
^ A suitable mild alkaline detergent,
which does not contain active
chlorine, should be used for thermal
disinfection programmes.
Some types of soiling may require
different combinations of cleaning
agents and other additives. The Miele
Professional Department will be
pleased to advise you.
Note
As a chargeable optional extra this
machine can also be fitted with a
DOS-Module G 60 dispenser pump for
liquid cleaning agent. This is connected
externally.
See "Programming special functions"
for venting the dispensing system and
setting the dosage.
The optional DOS Module is supplied
with its own installation and connection
instructions.
24
Maintenance of the dispensing
system
To ensure trouble-free operation the
following regular maintenance should
be carried out by a Miele approved ser-
vice technician.
Every 12-18 months:
Replace the dispensing hoses in the
DOS modules.
,
Take care when handling liquid
agents and additives. These may
contain irritant or corrosive
ingredients.
Follow the manufacturer's safety
instructions and relevant Health and
Safety procedures carefully.
Wear protective gloves and goggles.