Setting The Dosage - Miele G 7883 Operating Instructions Manual

^ Pour rinsing agent into the reservoir
until the level indicator is dark (see
arrow in the illustration). Use a funnel
if necessary.
^ Screw the cap back on and mop up
any spilt rinsing agent. This prevents
over-foaming occuring during the
next programme.
^ Wait until the indicator light H on the
control panel lights up again before
adding any more rinsing agent.

Setting the dosage

The dosage adjuster in the opening has
settings from 1 to 6 (1-6 ml). It is set to
3 (3 ml) at the factory.
^ Use a higher setting if spots are left
after drying.
^ If the surface becomes cloudy and
streaky, use a lower setting.
Rinsing agent
21