Altering The Wash Temperature And/Or The Temperature Holding Time In; The "Main Wash" And "Final Rinse" Programme Stages - Miele G 7883 Operating Instructions Manual

Programming special functions
2. Altering the wash
temperature and/or the
temperature holding time in
the "Main wash" (except with
the SPECIAL 93°C-10'
programme) and "Final rinse"
programme stages
Please make a note of any changes
to the wash temperature and / or the
temperature holding time in the
appropriate section of the
programme chart.
The programme chart shows the factory
settings for the Main wash temperature
together with temperature holding times
and the Final rinse temperature with its
temperature holding times.
The special functions can be used to
alter the temperatures of the main wash
and of the final rinse from 30 °C - 93 °C
and the temperature holding time from
1-15 minutes.
^ Turn the programme selector to the
STOP position f.
^ Switch off the machine.
^ Press and hold ß and 6 at the
same time, and whilst doing so,
switch the machine on with the I-0
button.
The current programme status "P..."
will appear in the display and the
p / 6 indicator light will come on.
36
"Main wash" temperature
(programme specific parameter):
^ Main wash 1:
Press the 0 button repeatedly or
keep it held in until "E09"
(programming level 9) appears in the
display.
Main wash 2:
Press the 0 button repeatedly or
keep it held in until "E12"
(programming level 12) appears in
the display.
^ Turn the programme selector to the
programme which needs to be
changed. The current value appears
in the display after °C.
^ Press ß or hold pressed in, until the
required value appears in the display.
Note:
Temperatures above 55° C cause blood
denaturation and possibly fixation.
"Main wash" temperature holding
time (programme specific
parameter):
^ Turn the programme selector to the
STOP position f.
^ Main wash 1:
Press the 0 button repeatedly or
keep it held in until "E10"
(programming level 10) appears in
the display.
Main wash 2:
Press the 0 button repeatedly or
keep it held in until "E13"
(programming level 13) appears in
the display.