Cleaning And Maintenance Of The Dispensing System - Miele PW 6163 Operating And Installation Instructions

Optional modules (depending on country)
Useful tip: The dispensing amount can be set from 0 to 9999 ml in
1 ml increments.
0/1
Press the multifunction button.

The dispensing hose will fill up.
Stop the process by pressing the

Run the hose of the dispenser pump upwards into a measuring

vessel.
Hold the entire measuring vessel above the dispenser pump while

doing this.
 Irritant detergents!
Skin and eye irritation.
Avoid contact with skin and eyes, wear protective clothing.
Return to the main menu by pressing  "Back".

Dispenser calibration
Dispenser pump 1
Dispenser pump 2
Select a dispenser pump.

Dispenser calibration
V: 100 ml
0/1
Press the multifunction button.

Stop the pump by pressing the
automatically after 60 seconds.
Measure the amount dispensed into the measuring vessel.

Dispenser calibration
V:
100 ml
Enter the amount measured in the

The throughput P is calculated in
Press the  "Save" button.

The measured value is assigned to the pump.
Reattach the hose.

0/1
Main menu

Dispenser pump 1

t: 0 s P: No
0/1 
0/1
button, or the pump will stop
Dispenser pump 1

t: s 200,0 ml min
30 P:
0/1

V:
field.
ml/min
button.



/

by the controls.
51