Operation; Switching On; Starting The Programme - Miele G 7883 Operating Instructions Manual

Operation

Switching on

^ Close the door.
^ Open the stopcocks (if turned off).
^ Press the I-0 button.
When the programme selector is at the
STOP position f, a point lights up in
the display.

Starting the programme

Choose your programme according to
the type of instruments or utensils being
cleaned, and the degree of soiling.
The different programmes and their
uses are described in the Programme
Chart at the end of this booklet.
^ Turn the programme selector
clockwise or anti-clockwise to the
required programme.
The first wash temperature of the
programme selected is shown in the
display, except for PRE-RINSE D and
DRAIN 6.
The indicator light next to the Start
button 6 flashes.
^ Select additional function DRYING
0 if required (see "Selecting an
additional function").
30
^ Press the Start button 6. The current
temperature will appear in the
display.
The indicator light next to the Start
button lights up.
Once the programme has started, all
other programmes are blocked. If the
programme selector is then turned to
another programme, the values shown
in the display go out. The values can be
seen again if the programme selector is
turned back to the position of the
programme currently in operation.
^ During a programme, the ß button
can be used to toggle between
displaying the actual temperature,
the elapsed time and the active wash
block*).
*) depending on model:
1 = Pre-wash 1
2 = Pre-wash 2
3 = Main wash 1
4 = Main wash 2
5 = Chemical disinfection
6 = Rinse 1
7 = Rinse 2
8 = Rinse 3
9 = Rinse 4
10 = Final rinse 1
11 = Final rinse 2
12 = Drying TA
13 = Drying