Miele G 7883 Operating Instructions Manual page 37

^ Turn the programme selector back to
the programme which needs to be
changed. The current value appears
in the display after min.
^ Press ß or hold pressed in, until the
required value appears in the display.
"Final rinse" temperature
(programme specific parameter):
^ Turn the programme selector to the
STOP position f.
^ Final rinse 1:
Press the 0 button repeatedly or
keep it held in until "E22"
(programming level 22) appears in
the display.
Final rinse 2:
Press the 0 button repeatedly or
keep it held in until "E25"
(programming level 25) appears in
the display. Then:
^ Turn the programme selector to the
programme which needs to be
changed. The current value appears
in the display after °C.
^ Press ß or hold pressed in, until the
required value appears in the display.
Note:
When using the vario TD programme
observe the requirements relating to the
appropriate infection prophylaxis.
Programming special functions
"Final rinse" temperature holding
time (programme specific
parameter):
^ Turn the programme selector to the
STOP position f.
^ Final rinse 1:
Press the 0 button repeatedly or
keep it held in until "E23"
(programming level 23) appears in
the display.
Final rinse 2:
Press the 0 button repeatedly or
keep it held in until "E26"
(programming level 26) appears in
the display. Then:
^ Turn the programme selector back to
the programme which needs to be
changed. The current value appears
in the display after min.
^ Press ß or hold pressed in, until the
required value appears in the display.
Having changed a value or all values:
^ Press the 6 button. SP appears.
^ Press 6 again. The change has
been recorded.
37