Tracks have not been recorded on the MD.*1
Play an MD with recorded tracks.
• The disc is dirty or inserted upside down. *1
Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
Insert another disc.
The connection of speakers/amplifiers is incorrect.
See the installation guide manual of this model to
check the connection.
FAILURE (Illuminates for about I second.)
When the XM tuner is connected, storing an XM radio
channel into a preset failed.
Be sure to receive the channel that you want to
store, then try it again.
The changer is loading the disc.
Wait until loading is complete.
L. SEEK +/-
The local seek mode is on during automatic tuning.
NO AF (CDX-HR905IP only)
There is no alternative frequency for the current
while the program service name
is f1ashing. The unit starts searching for another
frequency with the same PI (Program
Identification) data ("PI SEEK" appears).
The disc is not inserted in the CD/MD changer.
Insert discs in the changer.
Text information is not written in the MP3IWMA/
AAC files or ATRAC CD.
No iPod connected.
Connect iPod to dock connector.
If "NO IPOD" appears while connecting the iPod to
the dock connector, disconnect the iPod from the dock
connector, then reconnect.
The disc magazine is not inserted in the CD changer.
Insert the magazine in the changer.
The disc does not contain a music file.
Insert a music CD in this unit or MP3 playable
A disc/group/track name is not written in the track.
NO TP (CDX-HR905IP only)
The unit will continue searching for available TP
The lid of the MD changer is open or the MDs are not
Close the lid or insert the MDs properly.
There may be an internal malfunction.
Check the connection. If the error indication
remains on in the display, consult your nearest
The unit is reading all track and group/album
information on the disc.
Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
The CD unit and CD/MD changer cannot be operated
due to a problem.
Press the RESET button (page 7).
"L L L L"
or "-, -, -, -, "
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
The character cannot be displayed with the unit.
The disc number of the disc causing the error
appears in the display
an error occurs during playback of
CD or MD,
the disc number of the CD or MD does not appear
in the display
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.