Error Displays/Messages - Sony XR-F5100S Operating Instructions Manual

XR-F5100S/XR-F5100
CD/MD playback
The sound skips.
Dirty or defective disc.

Error displays/Messages

Error displays
(For this unit and optional CD/MD
changers* 1 )
The following indications will flash for about
5 seconds, and an alarm sound will be heard.
BLANK* 2
No tracks have been recorded on an MD*
t Play an MD with recorded tracks on it.
ERROR* 2
• A CD is dirty or inserted upside down*
t Clean or insert the CD correctly.
• A CD/MD cannot play because of some
problem.
t Insert another CD/MD.
FAILURE
The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this
model to check the connection.
NO DISC
No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.
NO MAG
The disc magazine is not inserted in the CD
unit.
t Insert the magazine in the CD unit.
NO MUSIC
A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD
unit.
NOTREADY
The lid of the MD unit is open or the MDs are
not inserted properly.
t Close the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error
indication remains on in the display,
consult your nearest Sony dealer.
RESET
The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.
26
*1 XR-F5100S/XR-F5100 only
*2 When an error occurs during playback of a CD or
MD, the disc number of the CD or MD does not
appear in the display.
*3 The disc number of the disc causing the error
appears in the display.
Messages
L.SEEK +/–
The local seek mode is on during automatic
tuning (page 11).
" " or "
You have reached the beginning or the end of
the disc and you cannot go any further.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
3 .
.
3
"