Repeat And Shuffle Play; Other Functions; Adjusting The Sound Characteristics - Balifad/Sub; Customizing The Equalizer Curve - Sony CDX-H905IP Operating Instructions Manual

Repeat and shuffle Play
1
During playback, press
®
(REP) or
(}) (SHUF) repeatedly until the
desired setting appears.
To return to normal play mode, select "REP
OFF" or "SHUF OFF."
Note
(DIe]) (GPIALBM -1+) will not work during shuffle
play
Scan
You can quickly locate a specific point on the
iPod.
1
During playback, press
®
until
"SCAN ON" appears.
The first 10 seconds of each track will be
played.
To return to normal play mode, select "SCAN
OFF."
Note
This function will not work during shuffle play.
Select
REP TRK
REP ALB
REP ART
REP PLY
SHUF ALB
SHUF ART
SHUF PLY
SHUF ALL
To play
track repeatedly.
album repeatedly.
artist repeatedly.
playlist repeatedly.
album in random order.
artist in random order.
playlist in random order.
all tracks in random order.
Other functions
Changing 111e slund settings
Adjusting the sound
characteristics - BAUFAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press
(SELECT)
repeatedly until
"BAL," "FAD" or "SUB" appears.
The item changes as follows:
LOW*1 __ MID*1 __ HI*1 __
BAL (left-right) -- FAD (front-rear) --
SUB (subwoofer volume)*2 __ AUX*3
*1 When EQ3 is activated (page 15).
*2 When the audio output is set to "SUB"
(page 16). •
"ATT" is displayed at the lowest setting, and can
be adjusted up to 21 steps.
*3 When AUX source is activated (page 18).
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal playlreception
mode.
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press
(EQ3)
repeatedly to select "CUSTOM."
2
Press
(SELECT)
repeatedly until
"LOW," "MID" or "HI" appears.
3
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from -10 dB to +10 dB.
+ 5d]
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold
(SELECT)
before the setting
is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
continue to next page
--15