Show - Motorola RFS Series Reference Manual

20.1.48 show

Wireless Configuration Commands
Displays current system information running on the switch
For other show commands, see
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
show <paramater>
Parameters
?
Example
RFSwitch(config-wireless)#show ?
access-list
aclstats
alarm-log
the system
autoinstall
banner
banner
boot
clock
commands
crypto
debugging
dhcp
environment
Chapter 2, Section 2.2 show
SWITCH NOTE: The following commands display only for
RFS6000:
• power
The following commands display only for RFS7000:
• port-channel
• static-channel-group
Displays all the parameters for which information can be
viewed using the show command
Wireless Instance
on page
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in
autoinstall configuration
Display Message of the Day Login
Display boot configuration.
Display system clock
Show command lists
encryption module
Debugging information outputs
DHCP Server Configuration
show environmental information
20-97
2-37.