Motorola RFS Series Reference Manual page 856

23-8 Motorola RF Switch CLI Reference Guide
23.1.6 no
RFID Instance
Supported in the following platforms:Negates a RTLS command or set its defaults
• RFS7000
• RFS6000
Syntax
no [activate|reader|service]
Parameters
activate
reader
service
Usage Guidelines
Use command to undo the configurations on the parameters mentioned in the table.
[no]
Refer to the parameters, within this chapter, for complete syntax.
Example
RFSwitch(config-rtls-rfid)#no activate
RFSwitch(config-rtls-rfid)#
Deactivates/disables RTLS adapter
Disables RFID reader configuration commands
Disables service commands