Show - Motorola RFS Series Reference Manual

12-22 Motorola RF Switch CLI Reference Guide

12.1.15 show

Interface Config Commands
Displays current system information running on the switch
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
show <parameter>
Parameters
?
Example
RFSwitch(config-if)#show ?
access-list
aclstats
alarm-log
system
autoinstall
banner
banner
boot
clock
commands
crypto
debugging
dhcp
SWITCH NOTE: The following commands display only for
RFS6000:
• power
The following commands display only for RFS7000:
• port-channel
• static-channel-group
Displays the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the
autoinstall configuration
Display Message of the Day Login
Display boot configuration.
Display system clock
Show command lists
encryption module
Debugging information outputs
DHCP Server Configuration