Motorola RFS Series Reference Manual page 148

2-100 Motorola RF Switch CLI Reference Guide
ap [<1-48>|<MAC>|
config [<1-48>|<MAC>]]
ap-containment
[config|table]
ap-detection-config
ap-images
ap-unadopted
approved-aps
channel-power
[11a|11b|11bg]
[indoor|outdoor]
client
[exclude-list|include-list]
config
country-code-list
Status of the adopted access port
• <1-48> – Defines the index of the access port
• <MAC> – Sets the MAC address of a access port
• config [<1-1024>|<MAC>] – Status of the configured
access port.
• <1-1024> – AP index from the "show wireless ap"
command
• <MAC> – MAC address of the ap.
Rogue AP containment
• config – Rogue AP Containment Parameters
• table – Rogue AP Containment table
Detected AP configuration parameters
Displays the access port images on the switch
Lists unadopted access ports
Displays approved APs detected by access port scans
Lists the channels and power levels available for a radio
• 11a – Defines the radio as 802.11a
• 11b – Defines the radio as 802.11b
• 11bg – Defines the radio as 802.11bg
These options are available for all the above radio types:
• indoor – Radio is placed indoors
• outdoor – Radio is placed outdoors
Wireless client configuration
• exclude-list – Sets the exclude list configuration
• include-list – Sets the include list configuration
Displays wireless configuration information
Displays the list of supported country names and their 2
letter IS0 3166 codes