Motorola RFS Series Reference Manual page 797

Wireless lan switches wing

Hide thumbs Also See for RFS Series:

Table of Contents

• rate-limit [wired-to-wireless|wireless-to-wired]

<100-1000000> – Sets traffic rate limit for users on the

selected WLAN.

• wired-to-wireless – Down link direction - from network

to wireless client.

• wireless-to-wired – Up link direction - from wireless

client to network.

• <100-1000000> – The rate to limit to in kbps.

• svp enable – Enables support for Spectralink Voice

Prioritization.

• weight <1-10> – The egress weight (relative priority to

other WLANs) of this WLAN. The weight sets the priority

for the packets to be sent.

Sets the 802.11e / Wireless Multi Media (WMM)

parameters (supported on AP300 & AAP5131).

• 8021p – Use 802.1p frame priority (field in the VLAN

tag) to determine packet priority.

• dscp –Use Differentiated Services Code Point (DSCP)

bits in the IP header to determine packet priority

• background [aisfn <2-15>|cw <0-15> <0-15>|txop-limit

<0-65535>] – Sets the parameters for background

• best-effort [aisfn <2-15>|cw <0-15> <0-15>|txop-limit

<0-65535>] – Sets the parameters for normal traffic.

• video [aisfn <2-15>|cw <0-15> <0-15>|txop-limit <0-

65535>] – Sets the parameters for video traffic.

• voice [aisfn <2-15>|cw <0-15> <0-15>|txop-limit <0-

65535>] – Sets the parameters for voice traffic.

Wireless Instance

Rfs6000 Rfs7000