Locate; Configures Location Commands - Motorola RFS Series Reference Manual

24.1.5 locate

SOLE Instance

Configures location commands

Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
locate [aeroscout|mobile-unit|ekahau]
locate mobile-unit [<MAC-Addr>|enable|interval]
locate ekahau [enable|interval]
Parameters
aeroscout [enable|interval
<5-3600>
mobile-unit
[<MAC-Addr>|
enable|interva
ekahau [enable|
interval<5-3600>
Usage Guidelines
Use
[no] locate [aeroscout|mobile-unit|ekahau]
configurations performed using
Locates aeroscout tags
• enable – Enables on-board aeroscout location engine service
• interval <5-3600> – Configures location interval for
on-board locationing of aeroscout tags in seconds
Locates specified mobile unit
• <MAC-Addr> enable – Enables location of specified MU
l]
<5-3600>
• enable – Enables location of all specified MUs
• interval <5-3600> – Configures MUs location interval for
locationing of MUs in seconds
Note: The switch currently supports locationing of 512 MUs only.
Locates
• enable – Enables on-board locationing ofekahau tags
• interval <5-3600> – Configures location interval for on-board
locationing of ekahau tags in seconds

locate

tags
ekahau
command
SOLE Instance
to rollback and disable all the
24-7