Motorola RFS Series Reference Manual page 784

20-106 Motorola RF Switch CLI Reference Guide
accounting
[none|radius|syslog]
acl exceed-rate mu-
denied-traffic
<0-1000000>
disassociate
add-vlan [<1-4094>|
<vlan-list>]
{limit <1-4094>}
answer-bcast-ess
Defines the accounting configuration on this WLAN.
• none – No accounting performed on this WLAN.
• radius – Uses RADIUS accounting on this WLAN.
• syslog – Uses Syslog accounting on this WLAN.
Sets the actions taken based on the ACL configuration.
• exceed-rate – Action is taken when rate exceeds a set
value.
• mu-denied-traffic – The action is to deny traffic to the
MU.
• <0-1000000> – The rate of packets / second after
exceeding which the traffic from the MU is denied
access.
• disassociate – When enabled, the MU is disassociated.
Instead of starting a new VLAN assignment for given
WLAN, this command adds a VLAN assignment to an
existing VLAN assignment. All prior VLAN settings are
retained.
• [<1-4094>|<vlan-list>] – Sets the VLAN range list <vlan-
list>. It can be either a single index or a list (1,3,7) or
range (3-7).
• limit – Sets user limits on VLANs to a value in the
range <1-4094> for this WLAN.
Note: The [no] form of add-vlan command deletes
the specified VLAN mapping over the specified WLAN
range list.
If the specified mapping does not exist for a particular
WLAN, a "specified vlan does not exists" message
displays.
The delete action continues on remaining VLANs. If all the
VLANs are deleted a default VLAN assignment takes effect.
Allows this WLAN to respond to probes for broadcast ESS.