User Programmable Feature; Time And Date - NEC DS2000 Feature Handbook

Tandem Trunking
To Barge In on a tandem call:
1. Press line key for busy line.
Press
(e.g., 101 for line 1).
2. Dial

Time and Date

The time and date shows
on all telephone displays.
Programmable Feature steps referenced below if you need to reset
the system time and date (e.g., after the Daylight Savings Time
change).

User Programmable Feature

# T D
Change your system's time and date. See User
Programmable Features at the end of this guide for more.
174
Use this procedure to rejoin a Conference already
in progress.
OR
and dial the line's Direct Line Access code
or press
BARG
.
The time and date appear on
all telephone displays in your
system. Follow the User