NEC DS2000 Feature Handbook page 203

To program a feature, press # and the feature's code. F or example, to enable incoming Paging, press # and dial V P Y , then SPK to
hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to the attendant.
Feature
Call Forwarding Clear All
Headset Mode
Hotline
Off Hook Signaling
Paging (Incoming)
Prime Line Assignment
Programmable Function
Key Assignments
Programmable Function
Key Ringing
Ringing Line Preference
Speed Dial, Personal
Speed Dial, System
Time and Date
Intercom Voice Announce
(for incoming Intercom calls)
User Programmable Features
User Programmable Features
Mnemonic Numeric
#CC #22
#HS #47
#HL #45
#OHS #647
#VP #87
#PLA #752
#KP #57
#RAC #722
#RAL #725
#RAP #727
#RLP #757
#SP #77
#SP #77
#TD #83
#VA #82
#CC + Y to clear (cancel) forwarding or N to exit without clearing +
SPK to hang up.
+ Y to enable or N to disable + SPK to exit.
#HS
#HL + Press flashing Hotline key + Enter extension for new Hotline
partner + HOLD + Program another Hotline key or SPK to exit.
+ Select mode ( C =Outside line, I =ICM, D =Hotline) + Select
#OHS
option (see below) + SPK to exit.
Outside line options: C =Camp On tone, O =Off Hook Ringing, 0 = None
Intercom options: C =Camp On, V =Voice Over, 0 =None
Hotline Options: C =Camp On, V =Voice Over, 0 =None
#VP + Y to enable or N to disable + SPK to exit.
#PLA + Press one of your flashing programmable keys or ICM +
to exit.
SPK
#KP + Press key you want to program + HOLD + ICM + Press VOL
Up or VOL Down to select key option + HOLD + (Enter any addi-
tional data if required + HOLD ) + Press VOL Up or VOL Down to
select another key to program, or CONF + SPK to exit.
Call Coverage Keys: #RAC + Call Coverage Key repeatedly to select
ringing mode + SPK to exit.
Call Coverage Keys flash as follows: Lamp only=On red, Immediate
ring=On green, Delay ring=Fast flash green.
Outside Line Keys: #RAL + Line Key repeatedly to select ringing
mode + SPK to exit.
Line keys flash as follows: Lamp only=On red, Immediate ring=On
green, Delay ring=Fast flash green, Night ring=Slow flash green.
Group Call Pickup Keys: #RAP + Group Call Pickup Key repeatedly
to select ringing mode + SPK to exit.
Group Call Pickup Keys flash as follows: Lamp only=On red, Imme-
diate ring=On green, Delay ring=Fast flash green.
#RLP + Y to enable or N to disable + SPK to exit.
+ Press bin key (for bins 701-710) or DIAL then bin key (for
#SP
bins 711-720) + HOLD + Dial outside line (e.g., 1), Line group (e.g.,
90-98), or ICM for Intercom feature + HOLD + Number to store +
+ Name + HOLD + Press another bin key or SPK to exit.
HOLD twice
#SP + Dial System Speed Dial bin number (e.g., 200) + HOLD +
Dial outside line (e.g., 1), Line group (e.g., 90-98), or ICM for Inter-
com feature + HOLD + Number to store + HOLD twice + Name +
HOLD + Dial another System Speed Dial bin or SPK to exit.
#TD + Enter time in 24-hour clock using hours (2 digits), minutes (2
digits) and seconds (2 digits) + HOLD + Enter date using month (2
digits), day (2 digits) and year (4 digits) + HOLD + SPK to exit.
#VA + V for voice announce or R for ring + SPK to exit.
Operation
195