NEC DS2000 Feature Handbook page 55

Central Office Calls, Placing
To place a call over a specific line (using Line Dial-Up or
Direct Line Access):
1. Press
2. For Line Dial-Up:
Dial +
OR
For Direct Trunk Access:
Dial
3. Dial the outside number you want to call.
tain outside numbers.
after dialing a digit, the system outdials any remain-
ing digits as tone (DTMF).
.
+ line number (e.g., 01 for line 1).
+ line number (e.g., 01 for line 1).
Toll Restriction may prevent you from dialing cer-
If you use a dial pulse line and wait 6 seconds
47