Aastra AastraLink Pro 160 User Manual page 59

Aastra IP Phone UI
Step Action
5 Do one of the following actions:
• If you do not wish to add the new party to the conference, press the line/call appearance button
for this call. This disconnects the new party, leaving the original call on hold. To go back to the
original call, press the line/call appearance button for this call.
• To add the new party to the conference, press the Conf key again. The Phone UI updates and
lists the extensions conferenced together (see below).
• To drop the new party from the conference, press the Conf key one more time.
Note: You can use
parties in the conference call.
6 If you wish to exit the conference, disconnect by placing the handset back on-hook or by
N
pressing
Note: Your system administrator can set your conference key to speeddial a specific number.
Contact your system administrator for more information.
41-001134-05, Rev 00, Rel. 1.1
to scroll through and see the numbers and names (if available) of the
Services
L1
1. 202
2. 203
Drop
Conf
.
Operating Your Aastra IP Phone Using the Phone UI
201- B Jones
Xfer
More
Handling Calls
2-39