Aastra AastraLink Pro 160 User Manual page 221

AastraLink Pro 160 Remote Office Configuration
Step Action
8 Enter the HTTP port start (for example, 51510).
The Phone prompts for a NAT IP address.
9 Enter the Home Router WAN-side IP address.
The phone prompts for the SIP port.
10 Enter the SIP port for the Home Router. For example, you can enter 51620.
The Phone prompts for an RTP port.
11 Enter the RTP port for the Home Router. For example, you can enter 51720.
The Phone prompts for an HTTPS port.
The following table is the port mapping table after a successful UPnP session with
the phone-side Home Router.
Home Router Port Mapping Table
Action Name
Allow
Allow
Allow
Allow
Allow
Allow
41-001134-05, Rev 00, Rel. 1.1
Remote Office Installation and Configuration of the Phone (Phone -Side)
Source
WAN, *
WAN, *
WAN, *
WAN, *
WAN, *
WAN, *
Manually Configuring Port-Forwarding
Destination Protocol
LAN, 192.168.1.3 UDP, 5060-51620
LAN, 192.168.1.3 TCP, 80-51510
LAN, 192.168.1.3 UDP, 3000-51720
LAN, 192.168.1.3 UDP, 3001-51721
LAN, 192.168.1.3 UDP, 3002-51722
LAN, 192.168.1.3 UDP, 3003-51723
C-11