Aastra AastraLink Pro 160 User Manual page 171

Ip phone network
Hide thumbs Also See for AastraLink Pro 160:
Table of Contents

Advertisement

Slide the cover of the battery compartment from the bottom of the handset
3.
until it locks into place.
Place the handset, face up, in the charging cradle. The handset should easily
4.
slide into the charging cradle. If it does not, check the battery compartment
cover to ensure it is properly closed.
Check the battery icon on the handset screen to confirm that it is blinking, and
5.
that the battery is properly charging.
The cordless handset is automatically "factory paired" to the base station and will
establish contact with the base station once both units are successfully installed.
You can verify this connection by checking for the presence of the Reception
range icon m beside the battery icon b on the handset screen.
Note: The battery must be charged for a minimum of six hours prior to initial use of the handset.
41-001134-05, Rev 00, Rel. 1.1
Aastra IP Phone Model Reference
Aastra IP Phone Model 9480i CT
Handset
(face down)
A-23

Advertisement

Table of Contents
loading

Table of Contents