Passwd] - KTI Networks KVB-311 User Manual

bureau
pppoe
usr/config$

5.3.22 [passwd]

For security concern, users have to input the password before entering
configuration mode. [passwd] command is for password setting purpose.
usr/config$ passwd
Password setting information and configuration
Usage:
passwd [-set [Login name] [Password]][-clean]
passwd -set
-clean Clear all password stored in flash.
Note:
1. Loginname can be only 'root' or 'administrator'
2. passwd -clean will clear all passwd stored in flash,
please use it with care.
Example:
passwd -set root Your_Passwd_Setting
passwd -clean
usr/config$
Parameter Usages:
–set: Set login name and password, input login name then input new password.
-clean: Will clear all password setup, and change null.
Note:
Gateway Login name only use [root] or [administrator]. [root] and [administrator]
have the same authorization, except commands that can be excuted by [Login
name: root] only [passwd –set root], [rom –boot], [room-boot2m] and [flash –clean].
For example:
usr/config$ passwd -set root root1234
: Enable
: Enable
Loginname Password.
KVB-311 Broadband VoIP Router User Manual
- 94 -