Table of Contents
Advertisement
Password
usr/config$
5.3.15 [voice]
The voice command is associated with the audio setting information. There are
four voice codecs supported by Gateway.
usr/config$ voice
Voice codec setting information and configuration
Usage:
voice [-send [G723 ms] [G711U ms] [G711A ms] [G729 ms] ]
[-volume [voice level] [input level] [dtmf level]]
[-nscng [G711U used1] [G711A used2] [G723 used3]]
[-echo used] [-mindelay t1] [-maxdelay t2]
voice -print
voice -priority [G723] [G711U] [G711A] [G729]
-print
-send
-priority Priority preference of installed codecs.
-volume
-nscng
-echo
-mindelay Setting of jitter buffer min delay. (0~150, default: 90).
-maxdelay Setting of jitter buffer max delay. (0~150, default: 150).
Example:
voice -send g723 60 g711u 60 g711a 60 g729 60
voice -volume voice 20 input 32 dtmf 27
: ***
Display voice codec information and configuration.
Specify sending packet size.
G.723 (30/60 ms)
G.711U (20/40/60 ms)
G.711A (20/40/60 ms)
G.729 (20/40/60/80 ms)
G.723
G.711U
G.711A
G.729
Specify the following levels:
voice volume (0~63, default: 25),
input gain (0~38, default: 25),
dtmf volume (0~31, default: 23),
No sound compression and CNG. (G.723.1 only, On=1, Off=0).
Setting of echo canceller. (On=1, Off=0, per port basis).
KVB-311 Broadband VoIP Router User Manual
- 82 -
Advertisement
Table of Contents
