Table of Contents
Advertisement
sip [-px address] [-px2 address] [-pxport number] [-outpxport number]
[-line1 number]
[-prefix prefixstring] [-expire t1] [-port udpPort] [-rtp rtpPort]
sip -print
-print
Display SIP stack information and configuration.
-mode
Configure as Peer-to-Peer mode:0/Proxy mode:1.
-px
Primary Proxy server address. (IPv4 address or dns name)
-px2
Secondary Proxy server address. (IPv4 address or dns name)
-pxport
Proxy server port.
-outpx
OutBound Proxy server address. (IPv4 address or dns name)
-outpxport OutBound Proxy server port. (the port of OutBound proxy)
-prefix
Specify prefix string, use it when UserID contains alphabets
(if UserID uses numerals, specify as null)
-line1
TEL1 Phone number.
-pbsearch Search phone book
-expire
The relative time after which the message expires(0 ~ (2^31-1))
-port
SIP local UDP port number (5060~5070), Default: 5060
-rtp
RTP port number (2326~65534), Default: 16384
Example:
sip -mode 1
sip -px 210.59.163.171 -line1 70
usr/config$
Parameter Usages:
-mode: Configure as Proxy mode or Peer-to-Peer mode (0: Peer-to-Peer mode, 1:
Proxy mode).
-px: to specify Proxy address when the Gateway is in proxy mode. Proxy address
can be IPv4 address or DNS name.
-px2: to setting Secondary Proxy server address. Proxy address can be IPv4
address or DNS name.
-pxport: Set Proxy port for the gateway to send message, default value is 5060, if
there is no special request of Proxy server, please don't change this value.
-outpx: Set IP Address or URL address (Domain Name Server must be configured.
Please refer to Network Configure) of outbound Proxy server.
-outpxport: Set outbound Proxy port for SIP-Phone to send message, default
value is 5060, if there is no special request of Proxy server, please don't change
this value.
KVB-311 Broadband VoIP Router User Manual
(the port of proxy)
0:off/1:on.
- 79 -
Advertisement
Table of Contents
