Table of Contents
Advertisement
4.3 Web Management Configuration
4.3.1 Network Interface
Click [Network Interface] in the navigation panel and open the Network Interface
Screen.
LAN IP Address:
-
192.168.254.254)
WAN IP Address:
-
-
Subnet Mask:
Default routing gateway:
-
-
Get IP Mode:
DHCP:
When DHCP function enables, the gateway will automatically search
-
DHCP server after reboot.
NAT:
Enable / Disable the Network Address Translation function
-
SNTP:
Enable / Disable the Simple Network Time Protocol function
-
-
SNTP Server Address:
When SNTP server is available, enable gateway SNTP function to point to
SNTP server IP address so that the gateway can get correct current time.
GMT:
Set time zone for SNTP Server time
-
User can set different time zone according to the location of the gateway. For
example, in Taiwan the time zone should be set as 8,which means GMT+8.
IP Sharing:
-
-
UPnP:
Enable it if IP sharing or NAT device supports UPnP function so that no
Set LAN IP Address of gateway (range: 192.168.1.1-
Set WAN IP Address of the gateway
Set the Subnet Mask of the gateway
Set Default routing gateway of the VoIP router
User has to set the gateway to use which network mode.
Set SNTP Server Address
Enable it if the gateway is behind IP Sharing router.
KVB-311 Broadband VoIP Router User Manual
- 44 -
Advertisement
Table of Contents
