Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for KTI Networks KB-100L
Summary of Contents for KTI Networks KB-100L
- Page 1 High Speed Internet BroadBand Router User Guide...
- Page 2 FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.
-
Page 3: Table Of Contents
TABLE OF CONTENT About This Guide..................18 Purpose ....................18 Overview of this User’s Guide ............18 Introduction....................19 Applications:..................20 Features: ....................20 Unpacking and Setup................21 Unpacking....................21 Setup....................21 Hardware Installation................22 Front Panel...................22 Rear Panel....................22 Hardware connections .................23 Connect the Internet Broadband Router ..........23 Check the installation ..............24 PC Network TCP/IP Setting ..............25 Windows 95/98/ME................25 Windows 2000..................26... -
Page 4: About This Guide
ABOUT THIS GUIDE Congratulations on your purchase of this 4-port Broadband Router. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. It provides a complete solution for Internet surfing and office resources sharing, and it is easy to configure and operate for even non-technical users. -
Page 5: Introduction
Introduction With the explosive growth of the Internet, accessing information and services at any time, day or night has become a standard requirement for most people. The era of the standalone PC is waning. Networking technology is moving out of the exclusive domain of corporations and into homes with at least two computers. -
Page 6: Applications
Applications: Broadband Internet access: Several computers can share one high-speed broadband connection (LAN and WAN-Internet). Resource sharing: Share resources such as printers, scanners and other peripherals. File sharing: Exchange data, messages, and distribute files thus making good use of hard disk space. Online gaming: Through the local area network, online gaming and e-commerce services can be easily setup. -
Page 7: Unpacking And Setup
Unpacking and Setup This chapter provides unpacking and setup information for the Broadband Router. Unpacking Open the box of the Broadband Router and carefully unpack it. The box should contain the following items: One 4-port High Speed Broadband Router One external power adapter This User’s Guide If any item is found missing or damaged, please contact your local reseller for replacement. -
Page 8: Hardware Installation
Hardware Installation Front Panel The figure below shows the front panel of the Broadband Router. 4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER This indicator lights green when the hub is receives power, otherwise, it is off. SYSTEM This indicator blinks green means the Internet Broadband Router is working successful. -
Page 9: Hardware Connections
4 Port 10/100Mbps Ethernet Broadband Router Rear Panel In the four port broadband router, there is an RJ-45 10/100Mbps Auto- MDIX port for the WAN that will fit the xDSL/Cable modem’s specification need. LAN (1-4) Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or 100Mbps Ethernet connections. -
Page 10: Check The Installation
Use another network cable to connect to the Ethernet card on the computer system, the other end of the cable connects to the LAN port of the Internet Broadband Router. Since the Internet Broadband Router has four ports, you can connect up to four computers directly to the unit. -
Page 11: Pc Network Tcp/Ip Setting
PC Network TCP/IP Setting The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP) and are as follows. Windows 95/98/ME Click on the “Network neighborhood” icon found on the desktop. Click the right mouse button and a context menu will be show. Select “Properties”... -
Page 12: Windows 2000
Select “None” for the “Gateway address” field. Windows 2000 Double click on the “My computer” icon on the desktop. When “My computer” window opens, open the “Control panel” and then open the “Network dialup connection” applet. Double click on the “Local area... - Page 13 network connection” icon. Select “Properties” to enter the TCP/IP setting window. In the “Local area network status” window, click on “Properties.” In the “Local area network connection” window, first select TCP/IP setting and then select “Properties.” Set both “IP address” and “DNS” to Automatic configuration.
-
Page 14: Windows Nt4.0
Windows NT4.0 Click on the “Start” button located on the lower left corner of the menu bar. Select “Settings” and then “Control panel.” In the “Control panel” window, select “Network” to enter the TCP/IP setting window. Set “IP address” to “Obtain an IP address automatically.” Set “DNS”... -
Page 15: Windows Xp
Windows XP Point the cursor and click the right button on the “My Network Place” icon. Select “properties” to enter the TCP/IP setting window. Set “IP address” to “Obtain an IP address automatically.” Set “DNS” to “Obtain DNS server address automatically.”... -
Page 16: Internet Broadband Router Configuration
INTERNET BROADBAND ROUTER CONFIGURATION First make sure that the network connections are functioning normally. This Internet Broadband Router can be configured using Internet Explorer 4.0 or newer web browser versions. Login to the Internet Broadband Router Before you configure this device, note that when the Broadband Router is configured through an Ethernet connection, make sure the host PC must be set on the IP subnetwork that can be accessed by the xDSL/Cable modem. -
Page 17: Quick Setup
After entering the password, the main web page comes up, there are two choices for setting, Quick Setup or Advanced Setup, it is recommended that the beginner to use the Quick Setup, it will lead you step by step to configure the Broadband Router. Quick Setup In the main web page, select “Quick Setup”... - Page 18 1-2-1 Cable modem (DHCP) To connect a cable modem with the Broadband Router, check the cable modem with the related user’s guide, then the Cable modem will automatically configure itself, the Broadband Router is configured to automatically assign addresses to each PC. Fill up the MAC Address of the network adapter when the DNS server need a certain address with the network adapter, or press the “Clone MAC Address”...
- Page 19 1-2-3 PPPoE (Dial-up xDSL) If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the ISP will provide a Password and User Name, then the ISP uses PPPoE. Choose this option and enter the required information, if the ISP provided a Service Name, enter it in the column of the Service Name field, otherwise, leave it blank.
- Page 20 IP Address, Your IP Address, Your Subnet Mask required by your ISP in the appropriate fields. If your ISP has provided you with a Connection ID, enter it in the Connection ID field, otherwise, leave it zero. The MTU feature specifies the largest packet size permitted for network transmission.
-
Page 21: Advance Setup
Advance Setup The Broadband Router supports advanced functions like System setting WAN setting, LAN setting, NAT Setting and Firewall setting. 2-1 System This page includes all the basic configuration tools for the Broadband Router. Point the selections in the left side of the menu screen. - Page 22 2-1-1 System Time Connecting to a Simple Network Time Protocol (SNTP) server allows the Broadband Router to synchronize the system clock to the global Internet through the SNTP Server. The synchronized clock in the Broadband Router is used to record the system log and control client filtering.
- Page 23 2-1-3 Firmware Upgrade By upgrading a new firmware for the Broadband Router to improve functionality and performance. Enter the path and name of the upgrade file then click the APPLY button below. You will be prompted to confirm the upgrade. While updating the firmware, please wait after pressing the APPLY button, and follow the instruction on the screen, the System Light on the front panel will start blinking when...
- Page 24 To restore the factory default settings of the Broadband Router, click on the “Restore” button. Backup Settings Press the “Backup Settings” button to save the current setting in a filed “config.bin” or given filename. Restore Settings To restore the backup file to the Broadband Router, enter the path and filename on the restore settings.
- Page 25 2-1-6 System Log View any attempts that have been made to gain access to the network. 2-1-7 Reset In the event that the Broadband Router stops responding correctly or in some way stops functioning, perform the reset function. The settings will not be changed.
- Page 26 2-2-2 Static IP If the Service Provider has assigned a fixed IP address, enter assigned address subnet mask and gateway address provided. Click “yes” if using two or more IP addresses. 2-2-3 Dial-up xDSL (PPPoE) If connected to the Internet using a Dial-up xDSL (PPPoE) Modem, the ISP will provide a Password and User Name, and then the ISP uses PPPoE.
- Page 27 The Maximum Idle Time feature can control the connection time while user’s need to save the cost of connection fee from ISP provider (default time=0, always connect). Click on the Connect-on-demand button to dial up to the ISP when only on demand, while there is a need of connecting to the ISP automatically.
- Page 28 2-2-5 DNS The Domain Name System (DNS) is the way that Internet domain names are located and translated into Internet Protocol (IP) addresses. If your ISP provided at least one DNS Server IP Address, type that IP Address in the Primary DNS address fields. You can type up to another DNS Server IP Addresses.
- Page 29 2-4 NAT Network Address Translation (NAT) allows multiple users at the local site to access the Internet through a single public IP address. NAT can also prevent hacker attacks by mapping local addresses to public addresses for key services such as the Web or FTP. 2-4-1 Special Application Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
- Page 30 the other end. Specifically, UDP doesn't provide sequencing of the packets that the data arrives in. This means that the application program that uses UDP must be able to make sure that the entire message has arrived and is in the right order. Network applications that want to save processing time because they have very small data units to exchange (and therefore very little message reassembling to do) may prefer UDP to TCP.
- Page 31 2-4-2 Virtual Server Configure the Broadband Router as a virtual server to allow the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that when the requested data returns through the Router, the data is pulled back to the proper computer by way of IP address and port mapping rules such as the Web or FTP at the local site via public IP addresses can be...
- Page 32 2-5 Firewall The Broadband Router provides extensive firewall protection by restricting connection parameters to limit the risk of hacker attack, and defending against a wide array of common hacker attacks. The Broadband Router provides packet filtering rules by restricting service ports, IP address or MAC address. However, for applications that require unrestricted access to the Internet, configure a specific client/server as a demilitarized zone (DMZ).
- Page 33 2-5-4 DMZ (Demilitarized Zone) If a local client PC cannot run an Internet application properly from behind the NAT firewall, open the client up to unrestricted two-way Internet access by defining a virtual DMZ Host.
-
Page 34: Technical Specifications
TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet ANSI/IEEE 802.3 Auto-negotiation Protocol CSMA/CD Data Transfer Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) Rate Fast Ethernet: 100Mbps (half duplex), 200Mbps (full- duplex) Topology Star Network 10BASET: 2-pair UTP Cat. 3,4,5 (100 m), EIA/TIA- 568 100- Cables ohm STP (100 m) 100BASE-TX: 2-pair UTP Cat.