Phone Configuration Screen - KTI Networks KVB-311 User Manual

4.3.6 Phone Configuration Screen

Click [Phone Configuration] in the navigation panel and open the [Phone Configuration]
Screen. For tone simulation, the Gateway adopts dual frequencies as traditional
telephone does. If users want to have their own call progress tone, they can change
the value of tones.
Ring Tone:
-
will give ring to phone set to trigger the ring. If user found that phone set
cannot ring when having incoming call, please try to increase ring frequency
here.
ringing frequency: 15 ~ 100 (Unit: Hz)
ringing ring ON/OFF: 0 ~ 8000 (Unit: ms)
ringing level: 0 ~ 94 (Unit: V)
tone frequency: 0 ~ 65535 (Unit: Hz)
tone freqLevel: 0 ~ 65535 (Unit: mVrms)
tone Tone ON/OFF: 0 ~ 8000 (Unit: ms)
- Ring Back Tone:
Busy Tone:
-
- Dial tone: Set Dial tone parameters.
Low(frq) : Frequency value of Low frequency
High(frq) : Frequency value of High frequency
Set Ring frequency, on time, off time, voltage level. The gateway
Set ring back tone parameters.
Set busy tone parameters.
KVB-311 Broadband VoIP Router User Manual
- 51 -