KTI Networks KVB-311 User Manual page 26

Broadband voip router
Table of Contents

Advertisement

1. Please contact with your Proxy vendor to obtain user account information.
2. If no need to enter password, user also has to set security information, please set
"name" the same with line number.
2.1.4.3.2 Peer-to-Peer Mode
Peer-to-Peer Mode allows users to call other VoIP devices without the proxy
server. When in Peer-To-Peer mode, the Gateway use Phone Book, which will dial
predefined phone number, and press "#" (optional, to accelerate the dial) as end of
dial.
To configure Peer-To-Peer Mode in the Gateway, follow the steps below:
Step 1. Set Peer-To-Peer Mode, using "sip" command
usr/config$ sip –mode 0
Mode 0 is for Peer-To-Peer mode, while mode 1 is for Proxy mode.
Step 2. Configure Phone Book, using "pbook" command.
usr/config$ pbook –add name TEST1 ip 10.1.1.1 e164 10
In this case user add one callee record named as TEST1, IP address as 10.1.1.1,
and mapping e.164 number as 10. After phone book data has been set, user can dial
10 to make a call for IP 10.1.1.1.
After the command completed, you can type "pbook –print" to see if the input record
is correct.
When adding a record to Phone Book, user does not have to reboot the machine,
and the record will be effective immediately.
KVB-311 Broadband VoIP Router User Manual
- 21 -

Advertisement

Table of Contents
loading

Table of Contents