KTI Networks KVB-311 User Manual page 74

-mask Set Internet subnet mask.
-gate Specify default gateway ip address
-nat Set NAT service flag (On/Off).
-dhcp Set DHCP client service flag (On/Off).
-sntp Set SNTP server mode and specify IP address.
-autodns Specify the way to obtain DNS Server (0:Manual/1:Auto).
-dns Specify IP address of DNS Server.
-timezone Set local timezone.
-ipsharing Specify usage of an IP sharing device and specify IP address.
-server Specify EMS Server IP address
-id Specify EMS Server ID
-pwd Specify EMS Server password
-emstime Specify EMS cycle time
Note:
Range of ip address setting (0.0.0.0 ~ 255.255.255.255).
DHCP client setting value (On=1, Off=0). If DHCP set to 'On',
Obtain a set of Internet configuration from DHCP server assgined.
SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode).
Example:
ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254
ifaddr -nat 1
ifaddr -dhcp 1
ifaddr -sntp 1 210.59.163.254
ifaddr -ipsharing 1 210.59.163.254
ifaddr -autodns 1
ifaddr -dns 1 168.95.1.1
usr/config$
Parameter Usages:
-print: Print current IP setting and status
-ip: Assigned IP address for Gateway
-lanip: Specify LAN port IP address (For NAT function), use this command setup
LAN IP address assigned to PC or other machine.
usr/config$ ifaddr -lanip 192.168.XXX.YYY
(The range of LAN IP is XXX: 1-254, YYY: 1-254)
-mask: Assigned internet subnet mask
KVB-311 Broadband VoIP Router User Manual
- 69 -